On Tue, 09 Mar 2021 14:15:13 +0000, Srinivas Kandagatla wrote:
> WSA881x SoundWire device ports are statically assigned to master ports
> at design time. So add bindings required to specify these mappings!
>
> Signed-off-by: Srinivas Kandagatla <[email protected]>
> ---
> .../devicetree/bindings/sound/qcom,wsa881x.yaml | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.example.dt.yaml:
speaker@0,1: 'qcom-port-mapping' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.example.dt.yaml:
speaker@0,2: 'qcom-port-mapping' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
See https://patchwork.ozlabs.org/patch/1449860
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
