[PATCH v5 2/3] arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules

[Aswath Govindraju]

From: Faiz Abbas <faiz_ab...@ti.com>

There are 6 gpio instances inside SoC with 2 groups as show below:
    Group one: wkup_gpio0, wkup_gpio1
    Group two: main_gpio0, main_gpio2, main_gpio4, main_gpio6

Only one instance from each group can be used at a time. So use main_gpio0
and wkup_gpio0 in current linux context and disable the rest of the nodes.

Signed-off-by: Faiz Abbas <faiz_ab...@ti.com>
Signed-off-by: Sekhar Nori <nsek...@ti.com>
Signed-off-by: Aswath Govindraju <a-govindr...@ti.com>
---
 .../boot/dts/ti/k3-j7200-common-proc-board.dts   | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts 
b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 4a7182abccf5..b493f939b09a 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -122,6 +122,22 @@
        status = "disabled";
 };
 
+&main_gpio2 {
+       status = "disabled";
+};
+
+&main_gpio4 {
+       status = "disabled";
+};
+
+&main_gpio6 {
+       status = "disabled";
+};
+
+&wkup_gpio1 {
+       status = "disabled";
+};
+
 &mcu_cpsw {
        pinctrl-names = "default";
        pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
-- 
2.17.1