On Mon, Mar 22, 2021 at 05:41:28PM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <a...@arndb.de>
>
> With gcc-11, we get a warning about code that looks correct
> but badly indented:
>
> drivers/video/backlight/jornada720_bl.c: In function
> ‘jornada_bl_update_status’:
> drivers/video/backlight/jornada720_bl.c:66:11: error: this ‘else’ clause does
> not guard... [-Werror=misleading-indentation]
> 66 | } else /* turn on backlight */
> | ^~~~
>
> Change the formatting according to our normal conventions.
>
> Fixes: 13a7b5dc0d17 ("backlight: Adds HP Jornada 700 series backlight driver")
> Signed-off-by: Arnd Bergmann <a...@arndb.de>
I'm dubious that the re-indent matches the original authors intent...
but it certainly does match what was actually written and tested so
on that basis:
Reviewed-by: Daniel Thompson <daniel.thomp...@linaro.org>
Daniel.
---
> drivers/video/backlight/jornada720_bl.c | 44 ++++++++++++-------------
> 1 file changed, 22 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/video/backlight/jornada720_bl.c
> b/drivers/video/backlight/jornada720_bl.c
> index 996f7ba3b373..066d0dc98f60 100644
> --- a/drivers/video/backlight/jornada720_bl.c
> +++ b/drivers/video/backlight/jornada720_bl.c
> @@ -66,30 +66,30 @@ static int jornada_bl_update_status(struct
> backlight_device *bd)
> } else /* turn on backlight */
> PPSR |= PPC_LDD1;
>
> - /* send command to our mcu */
> - if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) {
> - dev_info(&bd->dev, "failed to set brightness\n");
> - ret = -ETIMEDOUT;
> - goto out;
> - }
> + /* send command to our mcu */
> + if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) {
> + dev_info(&bd->dev, "failed to set brightness\n");
> + ret = -ETIMEDOUT;
> + goto out;
> + }
>
> - /*
> - * at this point we expect that the mcu has accepted
> - * our command and is waiting for our new value
> - * please note that maximum brightness is 255,
> - * but due to physical layout it is equal to 0, so we simply
> - * invert the value (MAX VALUE - NEW VALUE).
> - */
> - if (jornada_ssp_byte(BL_MAX_BRIGHT - bd->props.brightness)
> - != TXDUMMY) {
> - dev_err(&bd->dev, "set brightness failed\n");
> - ret = -ETIMEDOUT;
> - }
> + /*
> + * at this point we expect that the mcu has accepted
> + * our command and is waiting for our new value
> + * please note that maximum brightness is 255,
> + * but due to physical layout it is equal to 0, so we simply
> + * invert the value (MAX VALUE - NEW VALUE).
> + */
> + if (jornada_ssp_byte(BL_MAX_BRIGHT - bd->props.brightness)
> + != TXDUMMY) {
> + dev_err(&bd->dev, "set brightness failed\n");
> + ret = -ETIMEDOUT;
> + }
>
> - /*
> - * If infact we get an TXDUMMY as output we are happy and dont
> - * make any further comments about it
> - */
> + /*
> + * If infact we get an TXDUMMY as output we are happy and dont
> + * make any further comments about it
> + */
> out:
> jornada_ssp_end();
>
> --
> 2.29.2
>
