On Mon, Mar 22, 2021 at 05:18:31PM +0800, Chunyan Zhang wrote:
> From: Hongtao Wu <billows...@unisoc.com>
>
> This series adds PCIe controller driver for Unisoc SoCs.
> This controller is based on DesignWare PCIe IP.
>
> Signed-off-by: Hongtao Wu <billows...@unisoc.com>
> Signed-off-by: Chunyan Zhang <zhang.l...@gmail.com>
> ---
> drivers/pci/controller/dwc/Kconfig | 12 +
> drivers/pci/controller/dwc/Makefile | 1 +
> drivers/pci/controller/dwc/pcie-sprd.c | 292 +++++++++++++++++++++++++
> 3 files changed, 305 insertions(+)
> create mode 100644 drivers/pci/controller/dwc/pcie-sprd.c
>
> diff --git a/drivers/pci/controller/dwc/Kconfig
> b/drivers/pci/controller/dwc/Kconfig
> index 22c5529e9a65..61f0b79f963d 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -318,4 +318,16 @@ config PCIE_AL
> required only for DT-based platforms. ACPI platforms with the
> Annapurna Labs PCIe controller don't need to enable this.
>
> +config PCIE_SPRD
Maybe you want PCIE_SPRD_HOST for this one so there's room for a
PCIE_SPRD_EP someday?
> + tristate "Unisoc PCIe controller - Host Mode"
> + depends on ARCH_SPRD || COMPILE_TEST
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIE_DW_HOST
> + help
> + Unisoc PCIe controller uses the DesignWare core. It can be configured
> + as an Endpoint (EP) or a Root complex (RC). In order to enable host
> + mode (the controller works as RC), PCIE_SPRD must be selected.
> + Say Y or M here if you want to PCIe RC controller support on Unisoc
> + SoCs.
> +
> endmenu
> diff --git a/drivers/pci/controller/dwc/Makefile
> b/drivers/pci/controller/dwc/Makefile
> index a751553fa0db..eb546e97c14a 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_PCI_MESON) += pci-meson.o
> obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
> obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
> obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
> +obj-$(CONFIG_PCIE_SPRD) += pcie-sprd.o
>
> # The following drivers are for devices that use the generic ACPI
> # pci_root.c driver but don't support standard ECAM config access.
> diff --git a/drivers/pci/controller/dwc/pcie-sprd.c
> b/drivers/pci/controller/dwc/pcie-sprd.c
> new file mode 100644
> index 000000000000..2ccb99eda24f
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-sprd.c
> @@ -0,0 +1,292 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe host controller driver for Unisoc SoCs
> + *
> + * Copyright (C) 2020-2021 Unisoc, Inc.
> + *
> + * Author: Hongtao Wu <billows...@unisoc.com>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +
> +#include "pcie-designware.h"
> +
> +/* aon apb syscon */
> +#define IPA_ACCESS_CFG 0xcd8
> +#define AON_ACCESS_PCIE_EN BIT(1)
> +
> +/* pmu apb syscon */
> +#define SNPS_PCIE3_SLP_CTRL 0xac
> +#define PERST_N_ASSERT BIT(1)
> +#define PERST_N_AUTO_EN BIT(0)
> +#define PD_PCIE_CFG_0 0x3e8
> +#define PCIE_FORCE_SHUTDOWN BIT(25)
> +
> +#define PCIE_SS_REG_BASE 0xE00
Pick uppercase or lowercase for your hex constants and use it
consistently.
> +#define APB_CLKFREQ_TIMEOUT 0x4
> +#define BUSERR_EN BIT(12)
> +#define APB_TIMER_DIS BIT(10)
> +#define APB_TIMER_LIMIT GENMASK(31, 16)
> +
> +#define PE0_GEN_CTRL_3 0x58
> +#define LTSSM_EN BIT(0)
> +
> +struct sprd_pcie_soc_data {
> + u32 syscon_offset;
> +};
> +
> +static const struct sprd_pcie_soc_data ums9520_syscon_data = {
> + .syscon_offset = 0x1000, /* The offset of set/clear register */
> +};
> +
> +struct sprd_pcie {
> + u32 syscon_offset;
> + struct device *dev;
> + struct dw_pcie *pci;
> + struct regmap *aon_map;
> + struct regmap *pmu_map;
> + const struct sprd_pcie_soc_data *socdata;
> +};
> +
> +enum sprd_pcie_syscon_type {
> + normal_syscon, /* it's not a set/clear register */
> + set_syscon, /* set a set/clear register */
> + clr_syscon, /* clear a set/clear register */
> +};
> +
> +static void sprd_pcie_buserr_enable(struct dw_pcie *pci)
> +{
> + u32 val;
> +
> + val = dw_pcie_readl_dbi(pci, PCIE_SS_REG_BASE + APB_CLKFREQ_TIMEOUT);
> + val &= ~APB_TIMER_DIS;
> + val |= BUSERR_EN;
> + val |= APB_TIMER_LIMIT & (0x1f4 << 16);
> + dw_pcie_writel_dbi(pci, PCIE_SS_REG_BASE + APB_CLKFREQ_TIMEOUT, val);
> +}
> +
> +static void sprd_pcie_ltssm_enable(struct dw_pcie *pci, bool enable)
> +{
> + u32 val;
> +
> + val = dw_pcie_readl_dbi(pci, PCIE_SS_REG_BASE + PE0_GEN_CTRL_3);
> + if (enable)
> + dw_pcie_writel_dbi(pci, PCIE_SS_REG_BASE + PE0_GEN_CTRL_3,
> + val | LTSSM_EN);
> + else
> + dw_pcie_writel_dbi(pci, PCIE_SS_REG_BASE + PE0_GEN_CTRL_3,
> + val & ~LTSSM_EN);
> +}
> +
> +static int sprd_pcie_syscon_set(struct sprd_pcie *ctrl, struct regmap *map,
> + u32 reg, u32 mask, u32 val,
> + enum sprd_pcie_syscon_type type)
> +{
> + int ret = 0;
> + u32 read_val;
> + u32 offset = ctrl->syscon_offset;
> + struct device *dev = ctrl->pci->dev;
> +
> + /*
> + * Each set/clear register has three registers:
> + * reg: base register
> + * reg + offset: set register
> + * reg + offset * 2: clear register
> + */
> + switch (type) {
> + case normal_syscon:
> + ret = regmap_read(map, reg, &read_val);
> + if (ret) {
> + dev_err(dev, "failed to read register 0x%x\n", reg);
> + return ret;
> + }
> + read_val &= ~mask;
> + read_val |= (val & mask);
> + ret = regmap_write(map, reg, read_val);
> + break;
> + case set_syscon:
> + reg = reg + offset;
> + ret = regmap_write(map, reg, val);
> + break;
> + case clr_syscon:
> + reg = reg + offset * 2;
> + ret = regmap_write(map, reg, val);
> + break;
> + default:
> + break;
Unnecessary default case.
> + }
> +
> + if (ret)
> + dev_err(dev, "failed to write register 0x%x\n", reg);
> +
> + return ret;
> +}
> +
> +static int sprd_pcie_perst_assert(struct sprd_pcie *ctrl)
> +{
> + return sprd_pcie_syscon_set(ctrl, ctrl->pmu_map, SNPS_PCIE3_SLP_CTRL,
> + PERST_N_ASSERT, PERST_N_ASSERT, set_syscon);
> +}
> +
> +static int sprd_pcie_perst_deassert(struct sprd_pcie *ctrl)
> +{
> + int ret;
> +
> + ret = sprd_pcie_syscon_set(ctrl, ctrl->pmu_map, SNPS_PCIE3_SLP_CTRL,
> + PERST_N_ASSERT, 0, clr_syscon);
> + usleep_range(2000, 3000);
It'd be nice to have a spec reference for this delay.
> + return ret;
> +}
> +
> +static int sprd_pcie_power_on(struct platform_device *pdev)
You could pass in the "struct sprd_pcie *" here since the caller has
that already.
> +{
> + int ret;
> + struct sprd_pcie *ctrl = platform_get_drvdata(pdev);
> + struct dw_pcie *pci = ctrl->pci;
> +
> + ret = sprd_pcie_syscon_set(ctrl, ctrl->aon_map, PD_PCIE_CFG_0,
> + PCIE_FORCE_SHUTDOWN, 0, clr_syscon);
> + if (ret)
> + return ret;
> +
> + ret = sprd_pcie_syscon_set(ctrl, ctrl->aon_map, IPA_ACCESS_CFG,
> + AON_ACCESS_PCIE_EN, AON_ACCESS_PCIE_EN,
> + set_syscon);
> + if (ret)
> + return ret;
> +
> + ret = sprd_pcie_perst_deassert(ctrl);
> + if (ret)
> + return ret;
> +
> + sprd_pcie_buserr_enable(pci);
> + sprd_pcie_ltssm_enable(pci, true);
> +
> + return ret;
> +}
> +
> +static int sprd_pcie_power_off(struct platform_device *pdev)
And here. Caller would have to look up platform_get_drvdata(), as is
done in other drivers.
> +{
> + struct sprd_pcie *ctrl = platform_get_drvdata(pdev);
> + struct dw_pcie *pci = ctrl->pci;
> +
> + sprd_pcie_ltssm_enable(pci, false);
> +
> + sprd_pcie_perst_assert(ctrl);
> + sprd_pcie_syscon_set(ctrl, ctrl->aon_map, PD_PCIE_CFG_0,
> + PCIE_FORCE_SHUTDOWN, PCIE_FORCE_SHUTDOWN,
> + set_syscon);
> + sprd_pcie_syscon_set(ctrl, ctrl->aon_map, IPA_ACCESS_CFG,
> + AON_ACCESS_PCIE_EN, 0, clr_syscon);
> +
> + return 0;
> +}
> +
> +static int sprd_add_pcie_port(struct platform_device *pdev)
And here. Look at the other drivers in drivers/pci/controller/dwc/
and make yours as much like them as possible. This is not the place
for innovation.
> +{
> + struct sprd_pcie *ctrl = platform_get_drvdata(pdev);
> + struct dw_pcie *pci = ctrl->pci;
> + struct pcie_port *pp = &pci->pp;
> +
> + return dw_pcie_host_init(pp);
> +}
> +
> +static int sprd_pcie_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct sprd_pcie *ctrl;
> + struct dw_pcie *pci;
> + int ret;
> +
> + ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> + if (!ctrl)
> + return -ENOMEM;
> +
> + ctrl->socdata =
> + (struct sprd_pcie_soc_data *)of_device_get_match_data(dev);
Unnecessary cast.
It doesn't look like you even need to save this pointer in the struct
sprd_pcie. You use it below to get syscon_offset, but never reference
it after this function.
> + if (!ctrl->socdata) {
> + dev_warn(dev,
> + "using the default set/clear register offset address");
> + ctrl->syscon_offset = 0x1000;
> + }
> + ctrl->syscon_offset = ctrl->socdata->syscon_offset;
> +
> + ctrl->aon_map = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "sprd, regmap-aon");
> + if (IS_ERR(ctrl->aon_map)) {
> + dev_err(dev, "failed to get syscon regmap aon\n");
I think it's worth mentioning the exact string ("sprd, regmap-aon")
you were looking for. Also below.
> + ret = PTR_ERR(ctrl->aon_map);
> + goto err;
> + }
> +
> + ctrl->pmu_map = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "sprd, regmap-pmu");
> + if (IS_ERR(ctrl->pmu_map)) {
> + dev_err(dev, "failed to get syscon regmap pmu\n");
> + ret = PTR_ERR(ctrl->pmu_map);
> + goto err;
> + }
> +
> + pci = ctrl->pci;
> + pci->dev = dev;
> +
> + platform_set_drvdata(pdev, ctrl);
> +
> + ret = sprd_pcie_power_on(pdev);
> + if (ret < 0) {
> + dev_err(dev, "failed to power on, return %d\n",
> + ret);
> + goto err_power_off;
> + }
> +
> + ret = sprd_add_pcie_port(pdev);
> + if (ret) {
> + dev_warn(dev, "failed to initialize RC controller\n");
> + return ret;
You power off for the previous error but not this one?
> + }
> +
> + return 0;
> +
> +err_power_off:
> + sprd_pcie_power_off(pdev);
> +err:
> + return ret;
> +}
> +
> +static int sprd_pcie_remove(struct platform_device *pdev)
> +{
> + sprd_pcie_power_off(pdev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sprd_pcie_of_match[] = {
> + {
> + .compatible = "sprd,ums9520-pcie",
> + .data = &ums9520_syscon_data,
> + },
> + {},
> +};
> +
> +static struct platform_driver sprd_pcie_driver = {
> + .probe = sprd_pcie_probe,
> + .remove = sprd_pcie_remove,
> + .driver = {
> + .name = "sprd-pcie",
> + .of_match_table = sprd_pcie_of_match,
> + },
> +};
> +module_platform_driver(sprd_pcie_driver);
> +
> +MODULE_DESCRIPTION("Unisoc PCIe host controller driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>
