On Tue, Mar 23, 2021 at 05:33:27PM +1300, Chris Packham wrote:
> Convert i2c-mpc to YAML.
>
> Signed-off-by: Chris Packham <chris.pack...@alliedtelesis.co.nz>
> ---
> .../devicetree/bindings/i2c/i2c-mpc.txt | 62 ------------
> .../devicetree/bindings/i2c/i2c-mpc.yaml | 99 +++++++++++++++++++
> 2 files changed, 99 insertions(+), 62 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mpc.txt
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
> b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
> deleted file mode 100644
> index b15acb43d84d..000000000000
> --- a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
> +++ /dev/null
> @@ -1,62 +0,0 @@
> -* I2C
> -
> -Required properties :
> -
> - - reg : Offset and length of the register set for the device
> - - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
> - compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
> - mpc5200 or mpc5200b. For the mpc5121, an additional node
> - "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
> - - interrupts : <a b> where a is the interrupt number and b is a
> - field that represents an encoding of the sense and level
> - information for the interrupt. This should be encoded based on
> - the information in section 2) depending on the type of interrupt
> - controller you have.
> -
> -Recommended properties :
> -
> - - fsl,preserve-clocking : boolean; if defined, the clock settings
> - from the bootloader are preserved (not touched).
> - - clock-frequency : desired I2C bus clock frequency in Hz.
> - - fsl,timeout : I2C bus timeout in microseconds.
> -
> -Examples :
> -
> - /* MPC5121 based board */
> - i2c@1740 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5121-i2c", "fsl-i2c";
> - reg = <0x1740 0x20>;
> - interrupts = <11 0x8>;
> - interrupt-parent = <&ipic>;
> - clock-frequency = <100000>;
> - };
> -
> - i2ccontrol@1760 {
> - compatible = "fsl,mpc5121-i2c-ctrl";
> - reg = <0x1760 0x8>;
> - };
> -
> - /* MPC5200B based board */
> - i2c@3d00 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d00 0x40>;
> - interrupts = <2 15 0>;
> - interrupt-parent = <&mpc5200_pic>;
> - fsl,preserve-clocking;
> - };
> -
> - /* MPC8544 base board */
> - i2c@3100 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc8544-i2c", "fsl-i2c";
> - reg = <0x3100 0x100>;
> - interrupts = <43 2>;
> - interrupt-parent = <&mpic>;
> - clock-frequency = <400000>;
> - fsl,timeout = <10000>;
> - };
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
> b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
> new file mode 100644
> index 000000000000..97cea8a817ea
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
> @@ -0,0 +1,99 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/i2c-mpc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: I2C-Bus adapter for MPC824x/83xx/85xx/86xx/512x/52xx SoCs
> +
> +maintainers:
> + - Chris Packham <chris.pack...@alliedtelesis.co.nz>
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +properties:
> + compatible:
> + anyOf:
> + - items:
> + - enum:
> + - mpc5200-i2c
> + - fsl,mpc5200b-i2c
> + - fsl,mpc5200-i2c
> + - fsl,mpc5121-i2c
> + - fsl,mpc8313-i2c
> + - fsl,mpc8543-i2c
> + - fsl,mpc8544-i2c
> +
> + - const: fsl-i2c
> +
> + - contains:
> + const: fsl-i2c
> + minItems: 1
> + maxItems: 4
Can't we drop this and list out any other compatibles?
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + fsl,preserve-clocking:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: |
> + if defined, the clock settings from the bootloader are
> + preserved (not touched)
> +
> + fsl,timeout:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + I2C bus timeout in microseconds
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + /* MPC5121 based board */
> + i2c@1740 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc5121-i2c", "fsl-i2c";
> + reg = <0x1740 0x20>;
> + interrupts = <11 0x8>;
> + interrupt-parent = <&ipic>;
> + clock-frequency = <100000>;
> + };
> +
> + i2ccontrol@1760 {
> + compatible = "fsl,mpc5121-i2c-ctrl";
Drop this or document it. I'm trying to get rid of undocumented (by
schemas) compatibles in examples.
> + reg = <0x1760 0x8>;
> + };
> +
> + /* MPC5200B based board */
> + i2c@3d00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc5200b-i2c", "fsl,mpc5200-i2c", "fsl-i2c";
> + reg = <0x3d00 0x40>;
> + interrupts = <2 15 0>;
> + interrupt-parent = <&mpc5200_pic>;
> + fsl,preserve-clocking;
> + };
> +
> + /* MPC8544 base board */
> + i2c@3100 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc8544-i2c", "fsl-i2c";
> + reg = <0x3100 0x100>;
> + interrupts = <43 2>;
> + interrupt-parent = <&mpic>;
> + clock-frequency = <400000>;
> + fsl,timeout = <10000>;
> + };
> +...
> --
> 2.30.2
>
