From: Hermes Zhang <chenh...@axis.com>
Introduce a new multiple GPIOs LED driver. This LED will made of
multiple GPIOs (up to 8) and will map different brightness to different
GPIOs states which defined in dts file.
Signed-off-by: Hermes Zhang <chenh...@axis.com>
---
Notes:
changes v3:
- Remove LEDS_SIMPLE menu
- Minro code style fix
changes v2:
- use max_brightness(2^gpio numbers) instead of LED_FULL
- malloc the priv in once
- move the code to simple folder
drivers/leds/Kconfig | 3 +
drivers/leds/Makefile | 3 +
drivers/leds/simple/Kconfig | 12 +++
drivers/leds/simple/Makefile | 3 +
drivers/leds/simple/leds-multi-gpio.c | 144 ++++++++++++++++++++++++++
5 files changed, 165 insertions(+)
create mode 100644 drivers/leds/simple/Kconfig
create mode 100644 drivers/leds/simple/Makefile
create mode 100644 drivers/leds/simple/leds-multi-gpio.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b6742b4231bf..f95217b2fcf1 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -937,4 +937,7 @@ source "drivers/leds/trigger/Kconfig"
comment "LED Blink"
source "drivers/leds/blink/Kconfig"
+comment "LED Simple"
+source "drivers/leds/simple/Kconfig"
+
endif # NEW_LEDS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2a698df9da57..22cba8dfd6a9 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -111,3 +111,6 @@ obj-$(CONFIG_LEDS_TRIGGERS) += trigger/
# LED Blink
obj-$(CONFIG_LEDS_BLINK) += blink/
+
+# LED Simple
+obj-$(CONFIG_LEDS_SIMPLE) += simple/
diff --git a/drivers/leds/simple/Kconfig b/drivers/leds/simple/Kconfig
new file mode 100644
index 000000000000..98540b6c8d7a
--- /dev/null
+++ b/drivers/leds/simple/Kconfig
@@ -0,0 +1,12 @@
+config LEDS_MULTI_GPIO
+ tristate "LED Support for multiple GPIOs LED"
+ depends on LEDS_CLASS
+ depends on GPIOLIB
+ depends on OF
+ help
+ This option enables support for a multiple GPIOs LED. Such LED is made
+ of multiple GPIOs and could change the brightness by setting different
+ states of the GPIOs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called leds-multi-gpio.
diff --git a/drivers/leds/simple/Makefile b/drivers/leds/simple/Makefile
new file mode 100644
index 000000000000..2ba655fdc175
--- /dev/null
+++ b/drivers/leds/simple/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_LEDS_MULTI_GPIO) += leds-multi-gpio.o
diff --git a/drivers/leds/simple/leds-multi-gpio.c
b/drivers/leds/simple/leds-multi-gpio.c
new file mode 100644
index 000000000000..ede033354156
--- /dev/null
+++ b/drivers/leds/simple/leds-multi-gpio.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Axis Communications AB
+ */
+
+#include <linux/leds.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+
+#define MAX_GPIO_NUM 8
+
+struct multi_gpio_led_priv {
+ struct led_classdev cdev;
+
+ struct gpio_descs *gpios;
+
+ u16 nr_states;
+
+ u8 states[0];
+};
+
+
+static void multi_gpio_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct multi_gpio_led_priv *priv;
+ int idx;
+
+ DECLARE_BITMAP(values, MAX_GPIO_NUM);
+
+ priv = container_of(led_cdev, struct multi_gpio_led_priv, cdev);
+
+ idx = value > led_cdev->max_brightness ? led_cdev->max_brightness :
value;
+
+ values[0] = priv->states[idx];
+
+ gpiod_set_array_value(priv->gpios->ndescs, priv->gpios->desc,
+ priv->gpios->info, values);
+}
+
+static int multi_gpio_led_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct multi_gpio_led_priv *priv = NULL;
+ int ret;
+ const char *state = NULL;
+ struct led_init_data init_data = {};
+ struct gpio_descs *gpios;
+ u16 nr_states;
+
+ gpios = devm_gpiod_get_array(dev, "led", GPIOD_OUT_LOW);
+ if (IS_ERR(gpios))
+ return PTR_ERR(gpios);
+
+ if (gpios->ndescs >= MAX_GPIO_NUM) {
+ dev_err(dev, "Too many GPIOs\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_count_u8_elems(node, "led-states");
+ if (ret < 0)
+ return ret;
+
+ if (ret != (1 << gpios->ndescs)) {
+ dev_err(dev, "led-states number should equal to 2^led-gpios\n");
+ return -EINVAL;
+ }
+
+ nr_states = ret;
+
+ priv = devm_kzalloc(dev, sizeof(struct multi_gpio_led_priv) + nr_states,
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ret = of_property_read_u8_array(node, "led-states", priv->states,
nr_states);
+ if (ret)
+ return ret;
+
+ priv->gpios = gpios;
+ priv->nr_states = nr_states;
+
+ priv->cdev.max_brightness = nr_states;
+ priv->cdev.default_trigger = of_get_property(node,
"linux,default-trigger", NULL);
+ priv->cdev.brightness_set = multi_gpio_led_set;
+
+ init_data.fwnode = of_fwnode_handle(node);
+
+ ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
+ if (ret < 0)
+ return ret;
+
+ of_property_read_string(node, "default-state", &state);
+ if (!strcmp(state, "on"))
+ multi_gpio_led_set(&priv->cdev, priv->cdev.max_brightness);
+ else
+ multi_gpio_led_set(&priv->cdev, 0);
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static void multi_gpio_led_shutdown(struct platform_device *pdev)
+{
+ struct multi_gpio_led_priv *priv = platform_get_drvdata(pdev);
+
+ multi_gpio_led_set(&priv->cdev, 0);
+}
+
+static int multi_gpio_led_remove(struct platform_device *pdev)
+{
+ multi_gpio_led_shutdown(pdev);
+
+ return 0;
+}
+
+static const struct of_device_id of_multi_gpio_led_match[] = {
+ { .compatible = "multi-gpio-led", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_multi_gpio_led_match);
+
+static struct platform_driver multi_gpio_led_driver = {
+ .probe = multi_gpio_led_probe,
+ .remove = multi_gpio_led_remove,
+ .shutdown = multi_gpio_led_shutdown,
+ .driver = {
+ .name = "multi-gpio-led",
+ .of_match_table = of_multi_gpio_led_match,
+ },
+};
+
+module_platform_driver(multi_gpio_led_driver);
+
+MODULE_AUTHOR("Hermes Zhang <chenhui.zh...@axis.com>");
+MODULE_DESCRIPTION("Multiple GPIOs LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:leds-multi-gpio");
--
2.20.1
