The XR21V141X does not have a 5- or 6-bit mode, but the current
implementation failed to properly restore the old setting when CS5 or
CS6 was requested. Instead an invalid request would be sent to the
device.
Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver")
Signed-off-by: Johan Hovold <[email protected]>
---
drivers/usb/serial/xr_serial.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
index 0ca04906da4b..c59c8b47a120 100644
--- a/drivers/usb/serial/xr_serial.c
+++ b/drivers/usb/serial/xr_serial.c
@@ -467,6 +467,11 @@ static void xr_set_termios(struct tty_struct *tty,
termios->c_cflag &= ~CSIZE;
if (old_termios)
termios->c_cflag |= old_termios->c_cflag & CSIZE;
+ else
+ termios->c_cflag |= CS8;
+
+ if (C_CSIZE(tty) == CS7)
+ bits |= XR21V141X_UART_DATA_7;
else
bits |= XR21V141X_UART_DATA_8;
break;
--
2.26.3
