As documents have been renamed and moved around, their
references will break, but this will be unnoticed, as the
script which checks for it won't handle "../" references.
So, replace them by the full patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab+hua...@kernel.org>
---
.../input/touchscreen/resistive-adc-touch.txt | 2 +-
Documentation/devicetree/bindings/mfd/da9150.txt | 8 ++++----
.../devicetree/bindings/mfd/motorola-cpcap.txt | 16 ++++++++--------
3 files changed, 13 insertions(+), 13 deletions(-)
diff --git
a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
index 51456c0e9a27..fee0da12474e 100644
---
a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
+++
b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
@@ -5,7 +5,7 @@ Required properties:
- compatible: must be "resistive-adc-touch"
The device must be connected to an ADC device that provides channels for
position measurement and optional pressure.
-Refer to ../iio/iio-bindings.txt for details
+Refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details
- iio-channels: must have at least two channels connected to an ADC device.
These should correspond to the channels exposed by the ADC device and should
have the right index as the ADC device registers them. These channels
diff --git a/Documentation/devicetree/bindings/mfd/da9150.txt
b/Documentation/devicetree/bindings/mfd/da9150.txt
index f09b41fbdf47..763e0b639a82 100644
--- a/Documentation/devicetree/bindings/mfd/da9150.txt
+++ b/Documentation/devicetree/bindings/mfd/da9150.txt
@@ -15,13 +15,13 @@ Required properties:
- reg: Specifies the I2C slave address
- interrupts: IRQ line info for da9150 chip.
- interrupt-controller: da9150 has internal IRQs (own IRQ domain).
- (See ../interrupt-controller/interrupts.txt for
+ (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
for
further information relating to interrupt properties)
Sub-devices:
-- da9150-gpadc: See ../iio/adc/da9150-gpadc.txt
-- da9150-charger: See ../power/da9150-charger.txt
-- da9150-fg: See ../power/da9150-fg.txt
+- da9150-gpadc: See Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt
+- da9150-charger: See
Documentation/devicetree/bindings/power/da9150-charger.txt
+- da9150-fg: See Documentation/devicetree/bindings/power/da9150-fg.txt
Example:
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
index 5ddcc8f4febc..ebdccfb600b9 100644
--- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
+++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
@@ -16,14 +16,14 @@ Optional subnodes:
The sub-functions of CPCAP get their own node with their own compatible values,
which are described in the following files:
-- ../power/supply/cpcap-battery.txt
-- ../power/supply/cpcap-charger.txt
-- ../regulator/cpcap-regulator.txt
-- ../phy/phy-cpcap-usb.txt
-- ../input/cpcap-pwrbutton.txt
-- ../rtc/cpcap-rtc.txt
-- ../leds/leds-cpcap.txt
-- ../iio/adc/cpcap-adc.txt
+- Documentation/devicetree/bindings/power/supply/cpcap-battery.txt
+- Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
+- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
+- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
+- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
+- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
+- Documentation/devicetree/bindings/leds/leds-cpcap.txt
+- Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
The only exception is the audio codec. Instead of a compatible value its
node must be named "audio-codec".
--
2.30.2
