Hi Andy,
> > > On Thu, Mar 25, 2021 at 07:34:07PM +0200, Andy Shevchenko wrote:
> > > > The series provides one fix (patch 1) for GPIO to be able to wait for
> > > > the GPIO driver to appear. This is separated from the conversion to
> > > > the GPIO descriptors (patch 2) in order to have a possibility for
> > > > backporting. Patches 3 and 4 fix a minor warnings from Sparse while
> > > > moving to a new APIs. Patch 5 is MODULE_VERSION() clean up.
> > > >
> > > > Tested on Intel Minnowboard (v1).
> > >
> > > Anything should I do here?
> >
> > it's ok for me
>
> Thanks!
> Who may apply them?
I used your patches on kernel net-next 5.12.0-rc2, on a board with an
Intel(R) Atom(TM) CPU E640 @ 1.00GHz and an EG20T PCH.
I used the built-in OKI gigabit ethernet controller:
02:00.1 Ethernet controller: Intel Corporation Platform Controller Hub EG20T
Gigabit Ethernet Controller (rev 02)
Kernel driver in use: pch_gbe
with a simple iperf test and all works fine:
ht-700 ~ # iperf -c 192.168.200.1
------------------------------------------------------------
Client connecting to 192.168.200.1, TCP port 5001
TCP window size: 45.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.200.159 port 38638 connected with 192.168.200.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 178 MBytes 149 Mbits/sec
ht-700 ~ # iperf -c 192.168.200.1
------------------------------------------------------------
Client connecting to 192.168.200.1, TCP port 5001
TCP window size: 45.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.200.159 port 38640 connected with 192.168.200.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 178 MBytes 149 Mbits/sec
ht-700 ~ # iperf -c 192.168.200.1 -u
------------------------------------------------------------
Client connecting to 192.168.200.1, UDP port 5001
Sending 1470 byte datagrams
UDP buffer size: 208 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.200.159 port 58364 connected with 192.168.200.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1.25 MBytes 1.05 Mbits/sec
[ 3] Sent 893 datagrams
ht-700 ~ # iperf -c 192.168.200.1 -u
------------------------------------------------------------
Client connecting to 192.168.200.1, UDP port 5001
Sending 1470 byte datagrams
UDP buffer size: 208 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.200.159 port 32778 connected with 192.168.200.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1.25 MBytes 1.05 Mbits/sec
[ 3] Sent 893 datagrams
ht-700 ~ # uname -a
Linux ht-700 5.12.0-rc2-watchdog+ #12 SMP Thu Apr 8 11:08:49 CEST 2021 x86_64
x86_64 x86_64 GNU/Linux
ht-700 ~ #
I hope this can help you.
>
Tested-by: Flavio Suligoi <f.suli...@asem.it>
> --
> With Best Regards,
> Andy Shevchenko
>
Best regards,
Flavio Suligoi
