On Fri, Apr 09, 2021 at 12:14:54AM CDT, Andrew Jeffery wrote:
Hi Zev,
A couple of minor comments:
On Thu, 8 Apr 2021, at 10:46, Zev Weiss wrote:
These allow describing all the Aspeed VUART attributes currently
available via sysfs. aspeed,sirq
aspeed,lpc-interrupts now
Ah right, thanks.
provides a replacement for the
deprecated aspeed,sirq-polarity-sense property.
Signed-off-by: Zev Weiss <z...@bewilderbeest.net>
---
drivers/tty/serial/8250/8250_aspeed_vuart.c | 44 ++++++++++++++++++++-
1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c
b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 8433f8dbb186..75ef006fa24b 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -28,6 +28,10 @@
#define ASPEED_VUART_ADDRL 0x28
#define ASPEED_VUART_ADDRH 0x2c
+#define ASPEED_VUART_DEFAULT_LPC_ADDR 0x3f8
+#define ASPEED_VUART_DEFAULT_SIRQ 4
+#define ASPEED_VUART_DEFAULT_SIRQ_POLARITY IRQ_TYPE_LEVEL_LOW
+
struct aspeed_vuart {
struct device *dev;
void __iomem *regs;
@@ -393,7 +397,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
struct aspeed_vuart *vuart;
struct device_node *np;
struct resource *res;
- u32 clk, prop;
+ u32 clk, prop, sirq[2];
+ bool sirq_polarity;
int rc;
np = pdev->dev.of_node;
@@ -501,6 +506,43 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
of_node_put(sirq_polarity_sense_args.np);
}
+ rc = of_property_read_u32(np, "aspeed,lpc-io-reg", &prop);
+ if (rc < 0)
+ prop = ASPEED_VUART_DEFAULT_LPC_ADDR;
+
+ rc = aspeed_vuart_set_lpc_address(vuart, prop);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "invalid value in aspeed,lpc-io-reg
property\n");
+ goto err_clk_disable;
+ }
+
+ rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2);
+ if (rc < 0) {
+ sirq[0] = ASPEED_VUART_DEFAULT_SIRQ;
+ sirq[1] = ASPEED_VUART_DEFAULT_SIRQ_POLARITY;
+ }
+
+ rc = aspeed_vuart_set_sirq(vuart, sirq[0]);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "invalid sirq number in aspeed,lpc-interrupts >
property\n");
+ goto err_clk_disable;
+ }
+
+ switch (sirq[1]) {
+ case IRQ_TYPE_LEVEL_LOW:
+ sirq_polarity = false;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ sirq_polarity = true;
+ break;
+ default:
+ dev_err(&pdev->dev, "invalid sirq polarity in
aspeed,lpc-interrupts
property\n");
+ rc = -EINVAL;
+ goto err_clk_disable;
+ }
A bit ugly open-coding the mapping and error handling, maybe worth a helper?
Yeah, that sounds reasonable -- will do.
Thanks!
Zev
