Ups,
On Mon, Apr 12, 2021 at 11:43:12AM +0200, Jacopo Mondi wrote:
> Hi Eugene,
>
> On Mon, Apr 05, 2021 at 06:50:39PM +0300, Eugen Hristev wrote:
> > Move the max width and max height constants to the product specific driver
> > and have them in the device struct.
> >
> > Signed-off-by: Eugen Hristev <eugen.hris...@microchip.com>
> > ---
> > drivers/media/platform/atmel/atmel-isc-base.c | 28 +++++++++----------
> > drivers/media/platform/atmel/atmel-isc.h | 9 ++++--
> > .../media/platform/atmel/atmel-sama5d2-isc.c | 7 +++--
> > 3 files changed, 25 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/media/platform/atmel/atmel-isc-base.c
> > b/drivers/media/platform/atmel/atmel-isc-base.c
> > index 45fc8dbb7943..350076dd029a 100644
> > --- a/drivers/media/platform/atmel/atmel-isc-base.c
> > +++ b/drivers/media/platform/atmel/atmel-isc-base.c
> > @@ -1204,8 +1204,8 @@ static void isc_try_fse(struct isc_device *isc,
> > * just use the maximum ISC can receive.
> > */
> > if (ret) {
> > - pad_cfg->try_crop.width = ISC_MAX_SUPPORT_WIDTH;
> > - pad_cfg->try_crop.height = ISC_MAX_SUPPORT_HEIGHT;
> > + pad_cfg->try_crop.width = isc->max_width;
> > + pad_cfg->try_crop.height = isc->max_height;
> > } else {
> > pad_cfg->try_crop.width = fse.max_width;
> > pad_cfg->try_crop.height = fse.max_height;
> > @@ -1282,10 +1282,10 @@ static int isc_try_fmt(struct isc_device *isc,
> > struct v4l2_format *f,
> > isc->try_config.sd_format = sd_fmt;
> >
> > /* Limit to Atmel ISC hardware capabilities */
> > - if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
> > - pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
> > - if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
> > - pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
> > + if (pixfmt->width > isc->max_width)
> > + pixfmt->width = isc->max_width;
> > + if (pixfmt->height > isc->max_height)
> > + pixfmt->height = isc->max_height;
> >
> > /*
> > * The mbus format is the one the subdev outputs.
> > @@ -1327,10 +1327,10 @@ static int isc_try_fmt(struct isc_device *isc,
> > struct v4l2_format *f,
> > v4l2_fill_pix_format(pixfmt, &format.format);
> >
> > /* Limit to Atmel ISC hardware capabilities */
> > - if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
> > - pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
> > - if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
> > - pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
> > + if (pixfmt->width > isc->max_width)
> > + pixfmt->width = isc->max_width;
> > + if (pixfmt->height > isc->max_height)
> > + pixfmt->height = isc->max_height;
>
> What happens if the sensor sends a frame larger that the ISC max
> supported sizes ?
>
I meant to ask this question on the previous patch :/
> >
> > pixfmt->field = V4L2_FIELD_NONE;
> > pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp) >> 3;
> > @@ -1368,10 +1368,10 @@ static int isc_set_fmt(struct isc_device *isc,
> > struct v4l2_format *f)
> > return ret;
> >
> > /* Limit to Atmel ISC hardware capabilities */
> > - if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
> > - pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
> > - if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
> > - pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
> > + if (f->fmt.pix.width > isc->max_width)
> > + f->fmt.pix.width = isc->max_width;
> > + if (f->fmt.pix.height > isc->max_height)
> > + f->fmt.pix.height = isc->max_height;
> >
> > isc->fmt = *f;
> >
> > diff --git a/drivers/media/platform/atmel/atmel-isc.h
> > b/drivers/media/platform/atmel/atmel-isc.h
> > index 8d81d9967ad2..6becc6c3aaf0 100644
> > --- a/drivers/media/platform/atmel/atmel-isc.h
> > +++ b/drivers/media/platform/atmel/atmel-isc.h
> > @@ -10,9 +10,6 @@
> > */
> > #ifndef _ATMEL_ISC_H_
> >
> > -#define ISC_MAX_SUPPORT_WIDTH 2592
> > -#define ISC_MAX_SUPPORT_HEIGHT 1944
> > -
> > #define ISC_CLK_MAX_DIV 255
> >
> > enum isc_clk_id {
> > @@ -191,6 +188,9 @@ struct isc_ctrls {
> > * @gamma_table: pointer to the table with gamma values, has
> > * gamma_max sets of GAMMA_ENTRIES entries each
> > * @gamma_max: maximum number of sets of inside the gamma_table
> > + *
> > + * @max_width: maximum frame width, dependent on the internal
> > RAM
> > + * @max_height: maximum frame height, dependent on the internal
> > RAM
> > */
> > struct isc_device {
> > struct regmap *regmap;
> > @@ -254,6 +254,9 @@ struct isc_device {
> > /* pointer to the defined gamma table */
> > const u32 (*gamma_table)[GAMMA_ENTRIES];
> > u32 gamma_max;
> > +
> > + u32 max_width;
> > + u32 max_height;
> > };
> >
> > extern struct isc_format formats_list[];
> > diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> > b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> > index f45d8b96bfb8..f8d1c8ba99b3 100644
> > --- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> > +++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> > @@ -49,8 +49,8 @@
> > #include "atmel-isc-regs.h"
> > #include "atmel-isc.h"
> >
> > -#define ISC_MAX_SUPPORT_WIDTH 2592
> > -#define ISC_MAX_SUPPORT_HEIGHT 1944
> > +#define ISC_SAMA5D2_MAX_SUPPORT_WIDTH 2592
> > +#define ISC_SAMA5D2_MAX_SUPPORT_HEIGHT 1944
> >
> > #define ISC_CLK_MAX_DIV 255
> >
> > @@ -195,6 +195,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
> > isc->gamma_table = isc_sama5d2_gamma_table;
> > isc->gamma_max = 2;
> >
> > + isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH;
> > + isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
> > +
> > ret = isc_pipeline_init(isc);
> > if (ret)
> > return ret;
> > --
> > 2.25.1
> >
