On 14.04.2021 19:35:18, Aswath Govindraju wrote: > Add binding documentation for TI TCAN104x CAN transceivers. > > Signed-off-by: Aswath Govindraju <a-govindr...@ti.com> > --- > .../bindings/phy/ti,tcan104x-can.yaml | 56 +++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 57 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml > > diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml > b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml > new file mode 100644 > index 000000000000..4abfc30a97d0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml > @@ -0,0 +1,56 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml#"; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > + > +title: TCAN104x CAN TRANSCEIVER PHY > + > +maintainers: > + - Aswath Govindraju <a-govindr...@ti.com> > + > +properties: > + $nodename: > + pattern: "^tcan104x-phy" > + > + compatible: > + enum: > + - ti,tcan1042 > + - ti,tcan1043
Can you ensure that the 1042 has only the standby gpio and the 1043 has both?
> +
> + '#phy-cells':
> + const: 0
> +
> + standby-gpios:
> + description:
> + gpio node to toggle standby signal on transceiver
> + maxItems: 1
> +
> + enable-gpios:
> + description:
> + gpio node to toggle enable signal on transceiver
> + maxItems: 1
> +
> + max-bitrate:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + max bit rate supported in bps
> + minimum: 1
> +
> +required:
> + - compatible
> + - '#phy-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + transceiver1: tcan104x-phy {
> + compatible = "ti,tcan1043";
> + #phy-cells = <0>;
> + max-bitrate = <5000000>;
> + standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>;
> + enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_LOW>;
AFAICS the enable gpio is active high.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
signature.asc
Description: PGP signature
