Cleanup trailing whitespaces as checkpatch.pl suggests.
Signed-off-by: Denis Efremov <efre...@linux.com>
---
include/uapi/linux/fd.h | 46 ++++++++++++++++++++---------------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/include/uapi/linux/fd.h b/include/uapi/linux/fd.h
index 8b80c63b971c..7022e3413dbc 100644
--- a/include/uapi/linux/fd.h
+++ b/include/uapi/linux/fd.h
@@ -49,11 +49,11 @@ struct floppy_struct {
#define FDCLRPRM _IO(2, 0x41)
/* clear user-defined parameters */
-#define FDSETPRM _IOW(2, 0x42, struct floppy_struct)
+#define FDSETPRM _IOW(2, 0x42, struct floppy_struct)
#define FDSETMEDIAPRM FDSETPRM
/* set user-defined parameters for current media */
-#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct)
+#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct)
#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
#define FDDEFMEDIAPRM FDDEFPRM
#define FDGETMEDIAPRM FDGETPRM
@@ -65,7 +65,7 @@ struct floppy_struct {
/* issue/don't issue kernel messages on media type change */
-/*
+/*
* Formatting (obsolete)
*/
#define FD_FILL_BYTE 0xF6 /* format fill byte. */
@@ -126,13 +126,13 @@ typedef char floppy_drive_name[16];
*/
struct floppy_drive_params {
signed char cmos; /* CMOS type */
-
- /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms
+
+ /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms
* etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
*/
unsigned long max_dtr; /* Step rate, usec */
unsigned long hlt; /* Head load/settle time, msec */
- unsigned long hut; /* Head unload time (remnant of
+ unsigned long hut; /* Head unload time (remnant of
* 8" drives) */
unsigned long srt; /* Step rate, usec */
@@ -145,12 +145,12 @@ struct floppy_drive_params {
unsigned char rps; /* rotations per second */
unsigned char tracks; /* maximum number of tracks */
unsigned long timeout; /* timeout for interrupt requests */
-
- unsigned char interleave_sect; /* if there are more sectors, use
+
+ unsigned char interleave_sect; /* if there are more sectors, use
* interleave */
-
+
struct floppy_max_errors max_errors;
-
+
char flags; /* various flags, including ftd_msg */
/*
* Announce successful media type detection and media information loss after
@@ -162,7 +162,7 @@ struct floppy_drive_params {
#define FD_BROKEN_DCL 0x20
#define FD_DEBUG 0x02
#define FD_SILENT_DCL_CLEAR 0x4
-#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware
+#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware
considerations */
char read_track; /* use readtrack during probing? */
@@ -176,8 +176,8 @@ struct floppy_drive_params {
#define FD_AUTODETECT_SIZE 8
short autodetect[FD_AUTODETECT_SIZE]; /* autodetected formats */
-
- int checkfreq; /* how often should the drive be checked for disk
+
+ int checkfreq; /* how often should the drive be checked for disk
* changes */
int native_format; /* native format of this drive */
};
@@ -225,13 +225,13 @@ struct floppy_drive_struct {
* decremented after each probe.
*/
int keep_data;
-
+
/* Prevent "aliased" accesses. */
int fd_ref;
int fd_device;
- unsigned long last_checked; /* when was the drive last checked for a
disk
+ unsigned long last_checked; /* when was the drive last checked for a
disk
* change? */
-
+
char *dmabuf;
int bufblocks;
};
@@ -255,7 +255,7 @@ enum reset_mode {
/*
* FDC state
*/
-struct floppy_fdc_state {
+struct floppy_fdc_state {
int spec1; /* spec1 value last used */
int spec2; /* spec2 value last used */
int dtr;
@@ -302,16 +302,16 @@ struct floppy_write_errors {
* to the user process are not counted.
*/
- unsigned int write_errors; /* number of physical write errors
+ unsigned int write_errors; /* number of physical write errors
* encountered */
-
+
/* position of first and last write errors */
unsigned long first_error_sector;
int first_error_generation;
unsigned long last_error_sector;
int last_error_generation;
-
- unsigned int badness; /* highest retry count for a read or write
+
+ unsigned int badness; /* highest retry count for a read or write
* operation */
};
@@ -335,7 +335,7 @@ struct floppy_raw_cmd {
#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
#define FD_RAW_INTR 8 /* wait for an interrupt */
#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
-#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command
+#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command
* completion */
#define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */
#define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */
@@ -353,7 +353,7 @@ struct floppy_raw_cmd {
void __user *data;
char *kernel_data; /* location of data buffer in the kernel */
- struct floppy_raw_cmd *next; /* used for chaining of raw cmd's
+ struct floppy_raw_cmd *next; /* used for chaining of raw cmd's
* within the kernel */
long length; /* in: length of dma transfer. out: remaining bytes */
long phys_length; /* physical length, if different from dma length */
--
2.30.2
