On Sat, May 11, 2024 at 4:56 PM Dmitry Baryshkov <dmitry.barysh...@linaro.org> wrote: > > Protection domain mapper is a QMI service providing mapping between > 'protection domains' and services supported / allowed in these domains. > For example such mapping is required for loading of the WiFi firmware or > for properly starting up the UCSI / altmode / battery manager support. > > The existing userspace implementation has several issue. It doesn't play > well with CONFIG_EXTRA_FIRMWARE, it doesn't reread the JSON files if the > firmware location is changed (or if the firmware was not available at > the time pd-mapper was started but the corresponding directory is > mounted later), etc. > > However this configuration is largely static and common between > different platforms. Provide in-kernel service implementing static > per-platform data. > > To: Bjorn Andersson <anders...@kernel.org> > To: Konrad Dybcio <konrad.dyb...@linaro.org> > To: Sibi Sankar <quic_si...@quicinc.com> > To: Mathieu Poirier <mathieu.poir...@linaro.org> > Cc: linux-arm-...@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: linux-remotep...@vger.kernel.org > Cc: Johan Hovold <johan+lin...@kernel.org> > Cc: Xilin Wu <wuxilin...@gmail.com> > Cc: "Bryan O'Donoghue" <bryan.odonog...@linaro.org> > Cc: Steev Klimaszewski <st...@kali.org> > Cc: Alexey Minnekhanov <alexey...@postmarketos.org> > > -- > > Changes in v8: > - Reworked pd-mapper to register as an rproc_subdev / auxdev > - Dropped Tested-by from Steev and Alexey from the last patch since the > implementation was changed significantly. > - Add sensors, cdsp and mpss_root domains to 660 config (Alexey > Minnekhanov) > - Added platform entry for sm4250 (used for qrb4210 / RB2) > - Added locking to the pdr_get_domain_list() (Chris Lew) > - Remove the call to qmi_del_server() and corresponding API (Chris Lew) > - In qmi_handle_init() changed 1024 to a defined constant (Chris Lew) > - Link to v7: > https://lore.kernel.org/r/20240424-qcom-pd-mapper-v7-0-05f7fc646...@linaro.org > > Changes in v7: > - Fixed modular build (Steev) > - Link to v6: > https://lore.kernel.org/r/20240422-qcom-pd-mapper-v6-0-f96957d01...@linaro.org > > Changes in v6: > - Reworked mutex to fix lockdep issue on deregistration > - Fixed dependencies between PD-mapper and remoteproc to fix modular > builds (Krzysztof) > - Added EXPORT_SYMBOL_GPL to fix modular builds (Krzysztof) > - Fixed kerneldocs (Krzysztof) > - Removed extra pr_debug messages (Krzysztof) > - Fixed wcss build (Krzysztof) > - Added platforms which do not require protection domain mapping to > silence the notice on those platforms > - Link to v5: > https://lore.kernel.org/r/20240419-qcom-pd-mapper-v5-0-e35b6f847...@linaro.org > > Changes in v5: > - pdr: drop lock in pdr_register_listener, list_lock is already held (Chris > Lew) > - pd_mapper: reworked to provide static configuration per platform > (Bjorn) > - Link to v4: > https://lore.kernel.org/r/20240311-qcom-pd-mapper-v4-0-24679cca5...@linaro.org > > Changes in v4: > - Fixed missing chunk, reenabled kfree in qmi_del_server (Konrad) > - Added configuration for sm6350 (Thanks to Luca) > - Removed RFC tag (Konrad) > - Link to v3: > https://lore.kernel.org/r/20240304-qcom-pd-mapper-v3-0-6858fa1ac...@linaro.org > > Changes in RFC v3: > - Send start / stop notifications when PD-mapper domain list is changed > - Reworked the way PD-mapper treats protection domains, register all of > them in a single batch > - Added SC7180 domains configuration based on TCL Book 14 GO > - Link to v2: > https://lore.kernel.org/r/20240301-qcom-pd-mapper-v2-0-5d12a081d...@linaro.org > > Changes in RFC v2: > - Swapped num_domains / domains (Konrad) > - Fixed an issue with battery not working on sc8280xp > - Added missing configuration for QCS404 > > --- > Dmitry Baryshkov (5): > soc: qcom: pdr: protect locator_addr with the main mutex > soc: qcom: pdr: fix parsing of domains lists > soc: qcom: pdr: extract PDR message marshalling data > soc: qcom: add pd-mapper implementation > remoteproc: qcom: enable in-kernel PD mapper > > drivers/remoteproc/qcom_common.c | 87 +++++ > drivers/remoteproc/qcom_common.h | 10 + > drivers/remoteproc/qcom_q6v5_adsp.c | 3 + > drivers/remoteproc/qcom_q6v5_mss.c | 3 + > drivers/remoteproc/qcom_q6v5_pas.c | 3 + > drivers/remoteproc/qcom_q6v5_wcss.c | 3 + > drivers/soc/qcom/Kconfig | 15 + > drivers/soc/qcom/Makefile | 2 + > drivers/soc/qcom/pdr_interface.c | 17 +- > drivers/soc/qcom/pdr_internal.h | 318 ++--------------- > drivers/soc/qcom/qcom_pd_mapper.c | 676 > ++++++++++++++++++++++++++++++++++++ > drivers/soc/qcom/qcom_pdr_msg.c | 353 +++++++++++++++++++ > 12 files changed, 1190 insertions(+), 300 deletions(-) > --- > base-commit: e5119bbdaca76cd3c15c3c975d51d840bbfb2488 > change-id: 20240301-qcom-pd-mapper-e12d622d4ad0 > > Best regards, > -- > Dmitry Baryshkov <dmitry.barysh...@linaro.org> >
I've tested this over the weekend on my Thinkpad X13s with a number of reboots and seems to do the correct thing in v8 as well. Tested-by: Steev Klimaszewski <st...@kali.org>
