Fix missed serial input signal changes caused by rereading the
serial status register during interrupt processing. Now
processing is performed on original status register value.
Signed-off-by: Paul Fulghum <[EMAIL PROTECTED]>
--- a/drivers/char/synclink_gt.c 2008-01-24 16:58:37.000000000 -0600
+++ b/drivers/char/synclink_gt.c 2008-01-28 12:22:22.000000000 -0600
@@ -2040,37 +2040,41 @@ static void bh_transmit(struct slgt_info
tty_wakeup(tty);
}
-static void dsr_change(struct slgt_info *info)
+static void dsr_change(struct slgt_info *info, unsigned short status)
{
- get_signals(info);
+ if (status & BIT3) {
+ info->signals |= SerialSignal_DSR;
+ info->input_signal_events.dsr_up++;
+ } else {
+ info->signals &= ~SerialSignal_DSR;
+ info->input_signal_events.dsr_down++;
+ }
DBGISR(("dsr_change %s signals=%04X\n", info->device_name,
info->signals));
if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
slgt_irq_off(info, IRQ_DSR);
return;
}
info->icount.dsr++;
- if (info->signals & SerialSignal_DSR)
- info->input_signal_events.dsr_up++;
- else
- info->input_signal_events.dsr_down++;
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
}
-static void cts_change(struct slgt_info *info)
+static void cts_change(struct slgt_info *info, unsigned short status)
{
- get_signals(info);
+ if (status & BIT2) {
+ info->signals |= SerialSignal_CTS;
+ info->input_signal_events.cts_up++;
+ } else {
+ info->signals &= ~SerialSignal_CTS;
+ info->input_signal_events.cts_down++;
+ }
DBGISR(("cts_change %s signals=%04X\n", info->device_name,
info->signals));
if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
slgt_irq_off(info, IRQ_CTS);
return;
}
info->icount.cts++;
- if (info->signals & SerialSignal_CTS)
- info->input_signal_events.cts_up++;
- else
- info->input_signal_events.cts_down++;
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
@@ -2091,20 +2095,21 @@ static void cts_change(struct slgt_info
}
}
-static void dcd_change(struct slgt_info *info)
+static void dcd_change(struct slgt_info *info, unsigned short status)
{
- get_signals(info);
+ if (status & BIT1) {
+ info->signals |= SerialSignal_DCD;
+ info->input_signal_events.dcd_up++;
+ } else {
+ info->signals &= ~SerialSignal_DCD;
+ info->input_signal_events.dcd_down++;
+ }
DBGISR(("dcd_change %s signals=%04X\n", info->device_name,
info->signals));
if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
slgt_irq_off(info, IRQ_DCD);
return;
}
info->icount.dcd++;
- if (info->signals & SerialSignal_DCD) {
- info->input_signal_events.dcd_up++;
- } else {
- info->input_signal_events.dcd_down++;
- }
#if SYNCLINK_GENERIC_HDLC
if (info->netcount) {
if (info->signals & SerialSignal_DCD)
@@ -2127,20 +2132,21 @@ static void dcd_change(struct slgt_info
}
}
-static void ri_change(struct slgt_info *info)
+static void ri_change(struct slgt_info *info, unsigned short status)
{
- get_signals(info);
+ if (status & BIT0) {
+ info->signals |= SerialSignal_RI;
+ info->input_signal_events.ri_up++;
+ } else {
+ info->signals &= ~SerialSignal_RI;
+ info->input_signal_events.ri_down++;
+ }
DBGISR(("ri_change %s signals=%04X\n", info->device_name,
info->signals));
if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
slgt_irq_off(info, IRQ_RI);
return;
}
- info->icount.dcd++;
- if (info->signals & SerialSignal_RI) {
- info->input_signal_events.ri_up++;
- } else {
- info->input_signal_events.ri_down++;
- }
+ info->icount.rng++;
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
@@ -2191,13 +2197,13 @@ static void isr_serial(struct slgt_info
}
if (status & IRQ_DSR)
- dsr_change(info);
+ dsr_change(info, status);
if (status & IRQ_CTS)
- cts_change(info);
+ cts_change(info, status);
if (status & IRQ_DCD)
- dcd_change(info);
+ dcd_change(info, status);
if (status & IRQ_RI)
- ri_change(info);
+ ri_change(info, status);
}
static void isr_rdma(struct slgt_info *info)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
