From: Duje Mihanović <duje.mihano...@skole.hr>

Add DTS for Marvell PXA1908 SoC and Samsung Galaxy Core Prime Value
Edition LTE, a smartphone based on said SoC.

Signed-off-by: Duje Mihanović <duje.mihano...@skole.hr>
---
 arch/arm64/boot/dts/marvell/Makefile               |   3 +
 .../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 336 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/pxa1908.dtsi           | 300 ++++++++++++++++++
 3 files changed, 639 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/Makefile 
b/arch/arm64/boot/dts/marvell/Makefile
index 
ce751b5028e2628834340b5c50f8992092226eba..39c5749e631db33aa8fb0386a951c0a70215bc02
 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -32,3 +32,6 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9132-clearfog.dtb
+
+# MMP SoC Family
+dtb-$(CONFIG_ARCH_MMP) += pxa1908-samsung-coreprimevelte.dtb
diff --git a/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts 
b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
new file mode 100644
index 
0000000000000000000000000000000000000000..83b789a837d3876bf15ed0d7e10e190eacdfd56f
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "pxa1908.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+       model = "Samsung Galaxy Core Prime VE LTE";
+       compatible = "samsung,coreprimevelte", "marvell,pxa1908";
+
+       aliases {
+               mmc0 = &sdh2; /* eMMC */
+               mmc1 = &sdh0; /* SD card */
+               serial0 = &uart0;
+       };
+
+       chosen {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               stdout-path = "serial0:115200n8";
+
+               /* S-Boot places the initramfs here */
+               linux,initrd-start = <0x4d70000>;
+               linux,initrd-end = <0x5000000>;
+
+               fb0: framebuffer@17177000 {
+                       compatible = "simple-framebuffer";
+                       reg = <0 0x17177000 0 (480 * 800 * 4)>;
+                       width = <480>;
+                       height = <800>;
+                       stride = <(480 * 4)>;
+                       format = "a8r8g8b8";
+               };
+       };
+
+       /* Bootloader fills this in */
+       memory {
+               device_type = "memory";
+               reg = <0 0 0 0>;
+       };
+
+       reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               framebuffer@17000000 {
+                       reg = <0 0x17000000 0 0x1800000>;
+                       no-map;
+               };
+
+               gpu@9000000 {
+                       reg = <0 0x9000000 0 0x1000000>;
+               };
+
+               /* Communications processor, aka modem */
+               cp@5000000 {
+                       reg = <0 0x5000000 0 0x3000000>;
+               };
+
+               cm3@a000000 {
+                       reg = <0 0xa000000 0 0x80000>;
+               };
+
+               seclog@8000000 {
+                       reg = <0 0x8000000 0 0x100000>;
+               };
+
+               ramoops@8100000 {
+                       compatible = "ramoops";
+                       reg = <0 0x8100000 0 0x40000>;
+                       record-size = <0x8000>;
+                       console-size = <0x20000>;
+                       max-reason = <5>;
+               };
+       };
+
+
+       i2c-muic {
+               compatible = "i2c-gpio";
+               sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+               scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+               i2c-gpio,delay-us = <3>;
+               i2c-gpio,timeout-ms = <100>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c_muic_pins>;
+
+               muic: extcon@14 {
+                       compatible = "siliconmitus,sm5504-muic";
+                       reg = <0x14>;
+                       interrupt-parent = <&gpio>;
+                       interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&gpio_keys_pins>;
+               autorepeat;
+
+               key-home {
+                       label = "Home";
+                       linux,code = <KEY_HOME>;
+                       gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
+               };
+
+               key-volup {
+                       label = "Volume Up";
+                       linux,code = <KEY_VOLUMEUP>;
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+               };
+
+               key-voldown {
+                       label = "Volume Down";
+                       linux,code = <KEY_VOLUMEDOWN>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&smmu {
+       status = "okay";
+};
+
+&pmx {
+       pinctrl-single,gpio-range = <&range 55 55 0>,
+                                   <&range 110 32 0>,
+                                   <&range 52 1 0>;
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&board_pins_0 &board_pins_1 &board_pins_2>;
+
+       board_pins_0: board-pins-0 {
+               pinctrl-single,pins = <
+                       0x160 0
+                       0x164 0
+                       0x168 0
+                       0x16c 0
+               >;
+               pinctrl-single,drive-strength = <0x1000 0x1800>;
+               pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>;
+               pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>;
+               pinctrl-single,input-schmitt = <0 0x30>;
+               pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+               pinctrl-single,low-power-mode = <0x288 0x388>;
+       };
+
+       board_pins_1: board-pins-1 {
+               pinctrl-single,pins = <
+                       0x44 1
+                       0x48 1
+                       0x20 1
+                       0x18 1
+                       0x14 1
+                       0x10 1
+                       0xc 1
+                       0x8 1
+                       0x68 1
+                       0x58 0
+                       0x54 0
+                       0x7c 0
+                       0x6c 0
+                       0x70 0
+                       0x4c 1
+                       0x50 1
+                       0xac 0
+                       0x90 0
+                       0x8c 0
+                       0x88 0
+                       0x84 0
+                       0xc8 0
+                       0x128 0
+                       0x190 0
+                       0x194 0
+                       0x1a0 0
+                       0x114 0
+                       0x118 0
+                       0x1d8 0
+                       0x1e4 0
+                       0xe8 0
+                       0x100 0
+                       0x204 0
+                       0x210 0
+                       0x218 0
+               >;
+               pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+               pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>;
+               pinctrl-single,low-power-mode = <0x288 0x388>;
+       };
+
+       board_pins_2: board-pins-2 {
+               pinctrl-single,pins = <
+                       0x260 0
+                       0x264 0
+                       0x268 0
+                       0x26c 0
+                       0x270 0
+                       0x274 0
+                       0x78 0
+                       0x74 0
+                       0xb0 1
+               >;
+               pinctrl-single,drive-strength = <0x1000 0x1800>;
+               pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+               pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+               pinctrl-single,input-schmitt = <0 0x30>;
+               pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+               pinctrl-single,low-power-mode = <0 0x388>;
+       };
+
+       uart0_pins: uart0-pins {
+               pinctrl-single,pins = <
+                       0x198 6
+                       0x19c 6
+               >;
+               pinctrl-single,drive-strength = <0x1000 0x1800>;
+               pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+               pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+               pinctrl-single,input-schmitt = <0 0x30>;
+               pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+               pinctrl-single,low-power-mode = <0 0x388>;
+       };
+
+       gpio_keys_pins: gpio-keys-pins {
+               pinctrl-single,pins = <
+                       0x11c 0
+                       0x120 0
+                       0x1a4 0
+               >;
+               pinctrl-single,drive-strength = <0x1000 0x1800>;
+               pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+               pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>;
+               pinctrl-single,input-schmitt = <0 0x30>;
+               pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+               pinctrl-single,low-power-mode = <0 0x388>;
+       };
+
+       i2c_muic_pins: i2c-muic-pins {
+               pinctrl-single,pins = <
+                       0x154 0
+                       0x150 0
+               >;
+               pinctrl-single,drive-strength = <0x1000 0x1800>;
+               pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+               pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+               pinctrl-single,input-schmitt = <0 0x30>;
+               pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+               pinctrl-single,low-power-mode = <0x288 0x388>;
+       };
+
+       sdh0_pins_0: sdh0-pins-0 {
+               pinctrl-single,pins = <
+                       0x108 0
+               >;
+               pinctrl-single,drive-strength = <0x1000 0x1800>;
+               pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+               pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+               pinctrl-single,input-schmitt = <0 0x30>;
+               pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+               pinctrl-single,low-power-mode = <0 0x388>;
+       };
+
+       sdh0_pins_1: sdh0-pins-1 {
+               pinctrl-single,pins = <
+                       0x94 0
+                       0x98 0
+                       0x9c 0
+                       0xa0 0
+                       0xa4 0
+               >;
+               pinctrl-single,drive-strength = <0x800 0x1800>;
+               pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+               pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+               pinctrl-single,input-schmitt = <0 0x30>;
+               pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+               pinctrl-single,low-power-mode = <0 0x388>;
+       };
+
+       sdh0_pins_2: sdh0-pins-2 {
+               pinctrl-single,pins = <
+                       0xa8 0
+               >;
+               pinctrl-single,drive-strength = <0x1000 0x1800>;
+               pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+               pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+               pinctrl-single,input-schmitt = <0 0x30>;
+               pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+               pinctrl-single,low-power-mode = <0x208 0x388>;
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
+};
+
+&twsi0 {
+       status = "okay";
+};
+
+&twsi1 {
+       status = "okay";
+};
+
+&twsi2 {
+       status = "okay";
+};
+
+&twsi3 {
+       status = "okay";
+};
+
+&usb {
+       extcon = <&muic>, <&muic>;
+};
+
+&sdh2 {
+       /* Disabled for now because initialization fails with -ETIMEDOUT. */
+       status = "disabled";
+       bus-width = <8>;
+       non-removable;
+       mmc-ddr-1_8v;
+};
+
+&sdh0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdh0_pins_0 &sdh0_pins_1 &sdh0_pins_2>;
+       cd-gpios = <&gpio 11 0>;
+       cd-inverted;
+       bus-width = <4>;
+       wp-inverted;
+};
diff --git a/arch/arm64/boot/dts/marvell/pxa1908.dtsi 
b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
new file mode 100644
index 
0000000000000000000000000000000000000000..cf2b9109688ce560eec8a1397251ead68d78a239
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+/ {
+       model = "Marvell Armada PXA1908";
+       compatible = "marvell,pxa1908";
+       #address-cells = <2>;
+       #size-cells = <2>;
+       interrupt-parent = <&gic>;
+
+       cpus {
+               #address-cells = <2>;
+               #size-cells = <0>;
+
+               cpu0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0 0>;
+                       enable-method = "psci";
+               };
+
+               cpu1: cpu@1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0 1>;
+                       enable-method = "psci";
+               };
+
+               cpu2: cpu@2 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0 2>;
+                       enable-method = "psci";
+               };
+
+               cpu3: cpu@3 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0 3>;
+                       enable-method = "psci";
+               };
+       };
+
+       pmu {
+               compatible = "arm,cortex-a53-pmu";
+               interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+       };
+
+       psci {
+               compatible = "arm,psci-0.2";
+               method = "smc";
+       };
+
+       timer {
+               compatible = "arm,armv8-timer";
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                       <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                       <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                       <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>;
+       };
+
+       soc {
+               compatible = "simple-bus";
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               smmu: iommu@c0010000 {
+                       compatible = "arm,mmu-400";
+                       reg = <0 0xc0010000 0 0x10000>;
+                       #global-interrupts = <1>;
+                       #iommu-cells = <1>;
+                       interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+               };
+
+               gic: interrupt-controller@d1df9000 {
+                       compatible = "arm,gic-400";
+                       reg = <0 0xd1df9000 0 0x1000>,
+                               <0 0xd1dfa000 0 0x2000>,
+                               /* The subsequent registers are guesses. */
+                               <0 0xd1dfc000 0 0x2000>,
+                               <0 0xd1dfe000 0 0x2000>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+               };
+
+               apb@d4000000 {
+                       compatible = "simple-bus";
+                       reg = <0 0xd4000000 0 0x200000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0 0xd4000000 0x200000>;
+
+                       pdma: dma-controller@0 {
+                               compatible = "marvell,pdma-1.0";
+                               reg = <0 0x10000>;
+                               interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+                               dma-channels = <30>;
+                               #dma-cells = <2>;
+                       };
+
+                       twsi1: i2c@10800 {
+                               compatible = "mrvl,mmp-twsi";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               reg = <0x10800 0x64>;
+                               interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&apbc PXA1908_CLK_TWSI1>;
+                               mrvl,i2c-fast-mode;
+                               status = "disabled";
+                       };
+
+                       twsi0: i2c@11000 {
+                               compatible = "mrvl,mmp-twsi";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               reg = <0x11000 0x64>;
+                               interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&apbc PXA1908_CLK_TWSI0>;
+                               mrvl,i2c-fast-mode;
+                               status = "disabled";
+                       };
+
+                       twsi3: i2c@13800 {
+                               compatible = "mrvl,mmp-twsi";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               reg = <0x13800 0x64>;
+                               interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&apbc PXA1908_CLK_TWSI3>;
+                               mrvl,i2c-fast-mode;
+                               status = "disabled";
+                       };
+
+                       apbc: clock-controller@15000 {
+                               compatible = "marvell,pxa1908-apbc";
+                               reg = <0x15000 0x1000>;
+                               #clock-cells = <1>;
+                       };
+
+                       uart0: serial@17000 {
+                               compatible = "mrvl,mmp-uart", 
"intel,xscale-uart";
+                               reg = <0x17000 0x1000>;
+                               interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&apbc PXA1908_CLK_UART0>;
+                               reg-shift = <2>;
+                       };
+
+                       uart1: serial@18000 {
+                               compatible = "mrvl,mmp-uart", 
"intel,xscale-uart";
+                               reg = <0x18000 0x1000>;
+                               interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&apbc PXA1908_CLK_UART1>;
+                               reg-shift = <2>;
+                       };
+
+                       gpio: gpio@19000 {
+                               compatible = "marvell,mmp-gpio";
+                               reg = <0x19000 0x800>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               clocks = <&apbc PXA1908_CLK_GPIO>;
+                               interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "gpio_mux";
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                               ranges = <0 0x19000 0x800>;
+
+                               gpio@0 {
+                                       reg = <0x0 0x4>;
+                               };
+
+                               gpio@4 {
+                                       reg = <0x4 0x4>;
+                               };
+
+                               gpio@8 {
+                                       reg = <0x8 0x4>;
+                               };
+
+                               gpio@100 {
+                                       reg = <0x100 0x4>;
+                               };
+                       };
+
+                       pmx: pinmux@1e000 {
+                               compatible = "marvell,pxa1908-padconf", 
"pinconf-single";
+                               reg = <0x1e000 0x330>;
+
+                               #pinctrl-cells = <1>;
+                               pinctrl-single,register-width = <32>;
+                               pinctrl-single,function-mask = <7>;
+
+                               range: gpio-range {
+                                       #pinctrl-single,gpio-range-cells = <3>;
+                               };
+                       };
+
+                       uart2: serial@36000 {
+                               compatible = "mrvl,mmp-uart", 
"intel,xscale-uart";
+                               reg = <0x36000 0x1000>;
+                               interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&apbcp PXA1908_CLK_UART2>;
+                               reg-shift = <2>;
+                       };
+
+                       twsi2: i2c@37000 {
+                               compatible = "mrvl,mmp-twsi";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               reg = <0x37000 0x64>;
+                               interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&apbcp PXA1908_CLK_TWSI2>;
+                               mrvl,i2c-fast-mode;
+                               status = "disabled";
+                       };
+
+                       apbcp: clock-controller@3b000 {
+                               compatible = "marvell,pxa1908-apbcp";
+                               reg = <0x3b000 0x1000>;
+                               #clock-cells = <1>;
+                       };
+
+                       mpmu: clock-controller@50000 {
+                               compatible = "marvell,pxa1908-mpmu";
+                               reg = <0x50000 0x1000>;
+                               #clock-cells = <1>;
+                       };
+               };
+
+               axi@d4200000 {
+                       compatible = "simple-bus";
+                       reg = <0 0xd4200000 0 0x200000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0 0xd4200000 0x200000>;
+
+                       usbphy: phy@7000 {
+                               compatible = "marvell,pxa1928-usb-phy";
+                               reg = <0x7000 0x200>;
+                               clocks = <&apmu PXA1908_CLK_USB>;
+                               #phy-cells = <0>;
+                       };
+
+                       usb: usb@8000 {
+                               compatible = "chipidea,usb2";
+                               reg = <0x8000 0x200>;
+                               interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&apmu PXA1908_CLK_USB>;
+                               phys = <&usbphy>;
+                               phy-names = "usb-phy";
+                       };
+
+                       sdh0: mmc@80000 {
+                               compatible = "mrvl,pxav3-mmc";
+                               reg = <0x80000 0x120>;
+                               interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&apmu PXA1908_CLK_SDH0>;
+                               clock-names = "io";
+                               mrvl,clk-delay-cycles = <31>;
+                       };
+
+                       sdh1: mmc@80800 {
+                               compatible = "mrvl,pxav3-mmc";
+                               reg = <0x80800 0x120>;
+                               interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&apmu PXA1908_CLK_SDH1>;
+                               clock-names = "io";
+                               mrvl,clk-delay-cycles = <31>;
+                       };
+
+                       sdh2: mmc@81000 {
+                               compatible = "mrvl,pxav3-mmc";
+                               reg = <0x81000 0x120>;
+                               interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&apmu PXA1908_CLK_SDH2>;
+                               clock-names = "io";
+                               mrvl,clk-delay-cycles = <31>;
+                       };
+
+                       apmu: clock-controller@82800 {
+                               compatible = "marvell,pxa1908-apmu";
+                               reg = <0x82800 0x400>;
+                               #clock-cells = <1>;
+                       };
+               };
+       };
+};

-- 
2.46.2



Reply via email to