On 11/14/24 20:25, Mohan Prasad J wrote: > +#Setup: > +#Connect the DUT PC with NIC card to partner pc back via ethernet medium of > your choice(RJ45, T1) > +# > +# DUT PC Partner PC > +#┌───────────────────────┐ > ┌──────────────────────────┐ > +#│ │ │ > │ > +#│ │ │ > │ > +#│ ┌───────────┐ │ > │ > +#│ │DUT NIC │ Eth │ > │ > +#│ │Interface ─┼─────────────────────────┼─ any eth Interface > │ > +#│ └───────────┘ │ > │ > +#│ │ │ > │ > +#│ │ │ > │ > +#└───────────────────────┘ > └──────────────────────────┘ > +# > +#Configurations: > +#To prevent interruptions, Add ethtool, ip to the sudoers list in remote PC > and get the ssh key from remote. > +#Required minimum ethtool version is 6.10 > +#Change the below configuration based on your hw needs. > +# """Default values""" > +#time_delay = 8 #time taken to wait for transitions to happen, in seconds. > +#test_duration = 10 #performance test duration for the throughput check, in > seconds. > +#send_throughput_threshold = 80 #percentage of send throughput required to > pass the check > +#receive_throughput_threshold = 50 #percentage of receive throughput > required to pass the check
Very likely we will have to tune the thresholds and possibly make them dependent on the H/W and S/W setup (Kconf), but overall I think it makes sense as a first step. Thanks, Paolo
