The path MASTER_QUP_0 to SLAVE_EBI_CH0 would be qup-memory path and not
qup-config. Since the qup-memory path is not part of the qcom,geni-uart
bindings, just replace that path with the correct path for qup-config.
Fixes: b179f35b887b ("arm64: dts: qcom: sm6350: add uart1 node")
Cc: [email protected]
Signed-off-by: Luca Weiss <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi
b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index
8d697280249fefcc62ab0848e949b5509deb32a6..7b5c340df5f6f32233f4254db2012f84bdde6be2
100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -936,7 +936,7 @@ uart1: serial@884000 {
power-domains = <&rpmhpd SM6350_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 0
&clk_virt SLAVE_QUP_CORE_0 0>,
- <&aggre1_noc MASTER_QUP_0 0
&clk_virt SLAVE_EBI_CH0 0>;
+ <&gem_noc MASTER_AMPSS_M0 0
&config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
---
base-commit: 8155b4ef3466f0e289e8fcc9e6e62f3f4dceeac2
change-id: 20241220-sm6350-uart1-icc-de4c0ab8413d
Best regards,
--
Luca Weiss <[email protected]>
