This series adds all the necessary bits to enable DisplayPort-out over
USB-C on Fairphone 5.
There's currently a dt validation error with this, not quite sure how to
resolve this:
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dtb: typec-mux@42:
port:endpoint: Unevaluated properties are not allowed ('data-lanes' was
unexpected)
from schema $id: http://devicetree.org/schemas/usb/fcs,fsa4480.yaml#
See also this mail plus replies:
* https://lore.kernel.org/linux-arm-msm/[email protected]/
Signed-off-by: Luca Weiss <[email protected]>
---
Changes in v2:
- Move adding "*-switch;" properties already in earlier patches
- Move wiring up SS USB & DP to SoC instead of being done in device
- Pick up tags
- Link to v1:
https://lore.kernel.org/r/[email protected]
---
Luca Weiss (3):
arm64: dts: qcom: qcm6490-fairphone-fp5: Add PTN36502 redriver
arm64: dts: qcom: qcm6490-fairphone-fp5: Add OCP96011 audio switch
arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up DisplayPort over USB-C
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 103 +++++++++++++++++++--
arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 +-
2 files changed, 104 insertions(+), 8 deletions(-)
---
base-commit: dcb11dc4740372cd4cce0b763a4a8ec4e9f347a6
change-id: 20231208-fp5-pmic-glink-dp-216b76084bee
Best regards,
--
Luca Weiss <[email protected]>
