>-----Original Message-----
>From: Philipp Stanner <[email protected]>
>Sent: Thursday, April 24, 2025 5:19 PM
>To: Srujana Challa <[email protected]>; Vamsi Krishna Attunuru
><[email protected]>; Michael S. Tsirkin <[email protected]>; Jason
>Wang <[email protected]>; Xuan Zhuo <[email protected]>;
>Eugenio PĂ©rez <[email protected]>; Shijith Thotton
><[email protected]>; Dan Carpenter <[email protected]>;
>Philipp Stanner <[email protected]>; Satha Koteswara Rao Kottidi
><[email protected]>
>Cc: [email protected]; [email protected]
>Subject: [EXTERNAL] [PATCH v3] vdpa/octeon_ep: Control PCI dev enabling
>manually
>
>PCI region request functions such as pci_request_region() currently have the
>problem of becoming sometimes managed functions, if
>pcim_enable_device() instead of pci_enable_device() was called. The PCI
>subsystem wants to remove this deprecated 
>PCI region request functions such as pci_request_region() currently have the
>problem of becoming sometimes managed functions, if
>pcim_enable_device() instead of pci_enable_device() was called. The PCI
>subsystem wants to remove this deprecated behavior from its interfaces.
>
>octeopn_ep enables its device with pcim_enable_device() (for AF. PF uses
>manual management), but does so only to get automatic disablement. The
>driver wants to manage its PCI resources for AF manually, without devres.
>
>The easiest way not to use automatic resource management at all is by also
>handling device enable- and disablement manually.
>
>Replace pcim_enable_device() with pci_enable_device(). Add the necessary
>calls to pci_disable_device().
>
>Signed-off-by: Philipp Stanner <[email protected]>

Thanks, Philipp, for the patch. Patch looks good, minor nit AF --> VF
Acked-by: Vamsi Attunuru <[email protected]>

>---
>Changes in v3:
>  - Only call pci_disable_device() for the PF version. For AF it would
>    cause a WARN_ON because pcim_enable_device()'s callback will also
>    try to disable.
>---
> drivers/vdpa/octeon_ep/octep_vdpa_main.c | 17 ++++++++++++-----
> 1 file changed, 12 insertions(+), 5 deletions(-)
>
>diff --git a/drivers/vdpa/octeon_ep/octep_vdpa_main.c
>b/drivers/vdpa/octeon_ep/octep_vdpa_main.c
>index f3d4dda4e04c..9b49efd24391 100644
>--- a/drivers/vdpa/octeon_ep/octep_vdpa_main.c
>+++ b/drivers/vdpa/octeon_ep/octep_vdpa_main.c
>@@ -454,6 +454,9 @@ static void octep_vdpa_remove_pf(struct pci_dev
>*pdev)
>               octep_iounmap_region(pdev, octpf->base,
>OCTEP_HW_MBOX_BAR);
>
>       octep_vdpa_pf_bar_expand(octpf);
>+
>+      /* The pf version does not use managed PCI. */
>+      pci_disable_device(pdev);
> }
>
> static void octep_vdpa_vf_bar_shrink(struct pci_dev *pdev) @@ -825,7
>+828,7 @@ static int octep_vdpa_probe_pf(struct pci_dev *pdev)
>       struct octep_pf *octpf;
>       int ret;
>
>-      ret = pcim_enable_device(pdev);
>+      ret = pci_enable_device(pdev);
>       if (ret) {
>               dev_err(dev, "Failed to enable device\n");
>               return ret;
>@@ -834,15 +837,17 @@ static int octep_vdpa_probe_pf(struct pci_dev
>*pdev)
>       ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
>       if (ret) {
>               dev_err(dev, "No usable DMA configuration\n");
>-              return ret;
>+              goto disable_pci;
>       }
>       octpf = devm_kzalloc(dev, sizeof(*octpf), GFP_KERNEL);
>-      if (!octpf)
>-              return -ENOMEM;
>+      if (!octpf) {
>+              ret = -ENOMEM;
>+              goto disable_pci;
>+      }
>
>       ret = octep_iomap_region(pdev, octpf->base,
>OCTEP_HW_MBOX_BAR);
>       if (ret)
>-              return ret;
>+              goto disable_pci;
>
>       pci_set_master(pdev);
>       pci_set_drvdata(pdev, octpf);
>@@ -856,6 +861,8 @@ static int octep_vdpa_probe_pf(struct pci_dev *pdev)
>
> unmap_region:
>       octep_iounmap_region(pdev, octpf->base, OCTEP_HW_MBOX_BAR);
>+disable_pci:
>+      pci_disable_device(pdev);
>       return ret;
> }
>
>--
>2.48.1


Reply via email to