在 5/9/2025 4:54 PM, Konrad Dybcio 写道:
On 5/9/25 9:37 AM, Lijuan Gao wrote:
在 5/8/2025 10:41 PM, Konrad Dybcio 写道:
On 5/7/25 12:26 PM, Lijuan Gao wrote:
Add a simple-mfd representing IMEM on QCS615 and define the PIL
relocation info region as its child. The PIL region in IMEM is used to
communicate load addresses of remoteproc to post mortem debug tools, so
that these tools can collect ramdumps.
Signed-off-by: Lijuan Gao <quic_liju...@quicinc.com>
---
arch/arm64/boot/dts/qcom/qcs615.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi
b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index 53661e3a852e..fefdb0fd66f7 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -3266,6 +3266,20 @@ sram@c3f0000 {
reg = <0x0 0x0c3f0000 0x0 0x400>;
};
+ sram@146aa000 {
+ compatible = "qcom,qcs615-imem", "syscon", "simple-mfd";
+ reg = <0x0 0x146aa000 0x0 0x1000>;
0x14680000 0x2c000
I checked the latest datasheet, the Shared IMEM address is 0x146aa000 and its
size is 0x1000, 0x14680000 is the start address of IMEM layout. The shared IMEM
is used for debugging purposes, while the others parts are dedicated.
Even if we don't use the entirety of it, it's good to describe
the whole block
Konrad
According to the definitions on all existing upstream platforms, this
imem points to the shared imem. Should we stay consistent?
--
Thx and BRs
Lijuan Gao
