On 10/20/25 9:55 AM, Guido Günther wrote:
> They're used in the parent to describe the panel's reg property.
>
> Fixes the
>
> linux/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dtb: panel@0
> (visionox,rm69299-shift): '#address-cells', '#size-cells' do not match any of
> the regexes: '^pinctrl-[0-9]+$'
>
> warning.
>
> Signed-off-by: Guido Günther <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
> b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
> index 89260fce6513..44e7b5015d26 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
> @@ -472,6 +472,9 @@ &mdss_dsi0 {
> status = "okay";
> vdda-supply = <&vdda_mipi_dsi0_1p2>;
>
> + #address-cells = <1>;
> + #size-cells = <0>;
These are already defined in sdm845. you can simply delete the lines
below
Konrad
> +
> panel@0 {
> compatible = "visionox,rm69299-shift";
> status = "okay";
> @@ -479,9 +482,6 @@ panel@0 {
> vdda-supply = <&vreg_l14a_1p88>;
> vdd3p3-supply = <&vreg_l28a_3p0>;
>
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
>
> pinctrl-names = "default", "sleep";
>
> ---
> base-commit: f406055cb18c6e299c4a783fc1effeb16be41803
> change-id: 20251019-shift6mq-dt-e4b9e7dc7169
>
> Best regards,
