On Fri Nov 14, 2025 at 4:51 PM CET, Bryan O'Donoghue wrote: > On 14/11/2025 11:15, Luca Weiss wrote: >> Add bindings, driver and dts to support the Camera Subsystem on the >> SM6350 SoC. >> >> These patches were tested on a Fairphone 4 smartphone with WIP sensor >> drivers (Sony IMX576 and IMX582), the camera pipeline works properly as >> far as I can tell. >> >> Though when stopping the camera stream, the following clock warning >> appears in dmesg. But it does not interfere with any functionality, >> starting and stopping the stream works and debugcc is showing 426.4 MHz >> while the clock is on, and 'off' while it's off. >> >> Any suggestion how to fix this, is appreciated. >> >> [ 5738.590980] ------------[ cut here ]------------ >> [ 5738.591009] gcc_camera_axi_clk status stuck at 'on' >> [ 5738.591049] WARNING: CPU: 0 PID: 6918 at drivers/clk/qcom/clk-branch.c:87 >> clk_branch_toggle+0x170/0x190 > > Do you have a full and complete kernel tree we could look at here ?
Sure, this branch has everything in: https://github.com/sm6350-mainline/linux/tree/sm6350-6.17.y/ For further refence, at least two other people have tested this branch in postmarketOS, nothing particularly exciting to report from there, apart from that the sdm-skin-thermal thermal zone (thermistor right next to SoC) is currently configured with 55 degC as critical trip, which is quickly achieved when starting a video recording, but that's not really an issue with camss, but will need some tweaking regardless. https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/7281 Regards Luca > > --- > bod
