On Wed, Nov 26, 2025 at 03:59:48PM +0100, David Heidelberg wrote: > On 26/11/2025 15:41, Dmitry Baryshkov wrote: > > On Wed, Nov 26, 2025 at 09:08:35PM +0900, Robert Eckelmann via B4 Relay > > wrote: > > > From: Robert Eckelmann <[email protected]> > > > > > > Enable the SLPI dsp on the Xiaomi Pocophone F1 with Qualcom SDM845 SoC. > > > > > > Signed-off-by: Robert Eckelmann <[email protected]> > > > Signed-off-by: David Heidelberg <[email protected]> > > > --- > > > arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 7 +++++++ > > > 1 file changed, 7 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi > > > b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi > > > index 785006a15e97..0fb1d7e724c4 100644 > > > --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi > > > +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi > > > @@ -425,6 +425,12 @@ &sdhc_2 { > > > cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; > > > }; > > > +&slpi_pas { > > > + firmware-name = "qcom/sdm845/beryllium/slpi.mbn"; > > > > qcom/sdm845/Xiaomi/beryllium/slpi.mbn > > Could be this change done for all the firmware files at once but later? > > Currently all the firmwares using this legacy path.
I'd rather see the patch fixing firmware paths first and then the patch adding SLPI with the correct path from the day 0 (I feel sorry for causing pain to PmOS maintainers). Of course both patches can come as a part of the same series. > > David > > [...] -- With best wishes Dmitry
