On 12/13/25 14:00, David Heidelberg via B4 Relay wrote:
From: David Heidelberg <[email protected]>
All Snapdragon 845 platform has same controls GPIOs.
It's a bit clumsy and not very informative commit message, and MCLK is
not a "control GPIO", it's a pad function.
Signed-off-by: David Heidelberg <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso | 2 +-
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 8 --------
2 files changed, 1 insertion(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
index dbe1911d8e470..f6c2c98970d76 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
@@ -40,7 +40,7 @@ camera@10 {
/* CAM0_RST_N */
reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&cam0_default>;
+ pinctrl-0 = <&cam0_default &cam_mclk0_default>;
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
clock-names = "xvclk";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index ce23f87e0316b..981d19c20fa1f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -877,14 +877,6 @@ rst-pins {
drive-strength = <16>;
bias-disable;
};
-
- mclk0-pins {
- pins = "gpio13";
- function = "cam_mclk";
-
- drive-strength = <16>;
- bias-disable;
- };
};
cam3_default: cam3-default-state {
Reviewed-by: Vladimir Zapolskiy <[email protected]>
--
Best wishes,
Vladimir
