From: Manikanta Mylavarapu <[email protected]>

Enable nodes required for q6 remoteproc bring up.

Signed-off-by: Manikanta Mylavarapu <[email protected]>
Signed-off-by: Gokul Sriram Palanisamy <[email protected]>
Signed-off-by: George Moussalem <[email protected]>
---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 64 ++++++++++++++++++++++++++++++++++-
 1 file changed, 63 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi 
b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 
45fc512a3bab221c0d99f819294abf63369987da..c31b6906355ed7f7e8dd0fd8e1f46654cc5560eb
 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -2,7 +2,7 @@
 /*
  * IPQ5332 device tree source
  *
- * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights 
reserved.
+ * Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights 
reserved.
  */
 
 #include <dt-bindings/clock/qcom,apss-ipq.h>
@@ -146,6 +146,35 @@ smem@4a800000 {
 
                        hwlocks = <&tcsr_mutex 3>;
                };
+
+               q6_region: wcss@4a900000 {
+                       reg = <0x0 0x4a900000 0x0 0x2b00000>;
+                       no-map;
+               };
+       };
+
+       wcss: smp2p-wcss {
+               compatible = "qcom,smp2p";
+               qcom,smem = <435>, <428>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <GIC_SPI 418 IRQ_TYPE_EDGE_RISING>;
+
+               mboxes = <&apcs_glb 9>;
+
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <1>;
+
+               smp2p_wcss_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               smp2p_wcss_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
        };
 
        soc@0 {
@@ -586,6 +615,39 @@ frame@b128000 {
                        };
                };
 
+               q6v5_wcss: remoteproc@d100000 {
+                       compatible = "qcom,ipq5332-wcss-sec-pil";
+                       reg = <0x0d100000 0x10000>;
+                       firmware-name = "ath12k/IPQ5332/hw1.0/q6_fw0.mbn";
+                       interrupts-extended = <&intc GIC_SPI 421 
IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_wcss_in 0 IRQ_TYPE_NONE>,
+                                             <&smp2p_wcss_in 1 IRQ_TYPE_NONE>,
+                                             <&smp2p_wcss_in 2 IRQ_TYPE_NONE>,
+                                             <&smp2p_wcss_in 3 IRQ_TYPE_NONE>;
+                       interrupt-names = "wdog",
+                                         "fatal",
+                                         "ready",
+                                         "handover",
+                                         "stop-ack";
+
+                       clocks = <&gcc GCC_IM_SLEEP_CLK>;
+                       clock-names = "sleep";
+
+                       qcom,smem-states = <&smp2p_wcss_out 1>,
+                                          <&smp2p_wcss_out 0>;
+                       qcom,smem-state-names = "stop",
+                                               "shutdown";
+
+                       memory-region = <&q6_region>;
+
+                       glink-edge {
+                               interrupts = <GIC_SPI 417 IRQ_TYPE_EDGE_RISING>;
+                               label = "rtr";
+                               qcom,remote-pid = <1>;
+                               mboxes = <&apcs_glb 8>;
+                       };
+               };
+
                pcie1: pcie@18000000 {
                        compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574";
                        reg = <0x18000000 0xf1c>,

-- 
2.52.0



Reply via email to