On 05/02/2026 11:51, Konrad Dybcio wrote:
On 2/5/26 10:58 AM, David Heidelberg wrote:
On 05/02/2026 10:05, Konrad Dybcio wrote:
On 2/4/26 6:03 PM, David Heidelberg via B4 Relay wrote:
From: David Heidelberg <[email protected]>
Downstream defines minimal voltage as 3.0 V, while when OnePlus 6 was
introduced to Linux mainline, the value was fixed to maximum 3.3V.
Signed-off-by: David Heidelberg <[email protected]>
---
Tested for ~ 1 month. Seems to work well, no visible issues anywhere.
---
arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 5b121ea5520f5..e950db41ce25a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -307,7 +307,7 @@ vreg_l20a_2p95: ldo20 {
};
vreg_l23a_3p3: ldo23 {
- regulator-min-microvolt = <3300000>;
+ regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -320,7 +320,7 @@ vreg_l24a_3p075: ldo24 {
};
vreg_l25a_3p3: ldo25 {
- regulator-min-microvolt = <3300000>;
+ regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
A datasheet tells me this is out of spec for this wireless chip
As I don't have the datasheet, can you clarify if the 3.3 - 3.312V is the
correct range which should be kept?
These settings are OK.
Konrad
Good, I'm dropping the patch then!
Thank you
David
--
David Heidelberg
