The U8500 platform was converted to DT around 2013 and is DT only meanwhile. This driver has never been converted to a DT driver, so it clearly hasn't been used since then. To ease upcoming refactoring in the hwspinlock subsystem, remove this obsolete driver.
Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Acked-by: Andy Shevchenko <[email protected]> --- MAINTAINERS | 1 - drivers/hwspinlock/Kconfig | 10 --- drivers/hwspinlock/Makefile | 1 - drivers/hwspinlock/u8500_hsem.c | 155 -------------------------------- 4 files changed, 167 deletions(-) delete mode 100644 drivers/hwspinlock/u8500_hsem.c diff --git a/MAINTAINERS b/MAINTAINERS index 61bf550fd37c..b4cb7a63e800 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3157,7 +3157,6 @@ F: drivers/clocksource/clksrc-dbx500-prcmu.c F: drivers/dma/ste_dma40* F: drivers/pmdomain/st/ste-ux500-pm-domain.c F: drivers/gpio/gpio-nomadik.c -F: drivers/hwspinlock/u8500_hsem.c F: drivers/i2c/busses/i2c-nomadik.c F: drivers/iio/adc/ab8500-gpadc.c F: drivers/mfd/ab8500* diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig index 3874d15b0e9b..d84e00084ee2 100644 --- a/drivers/hwspinlock/Kconfig +++ b/drivers/hwspinlock/Kconfig @@ -53,14 +53,4 @@ config HWSPINLOCK_SUN6I If unsure, say N. -config HSEM_U8500 - tristate "STE Hardware Semaphore functionality" - depends on ARCH_U8500 || COMPILE_TEST - help - Say y here to support the STE Hardware Semaphore functionality, which - provides a synchronisation mechanism for the various processor on the - SoC. - - If unsure, say N. - endif # HWSPINLOCK diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile index a0f16c9aaa82..3a740805949d 100644 --- a/drivers/hwspinlock/Makefile +++ b/drivers/hwspinlock/Makefile @@ -9,4 +9,3 @@ obj-$(CONFIG_HWSPINLOCK_QCOM) += qcom_hwspinlock.o obj-$(CONFIG_HWSPINLOCK_SPRD) += sprd_hwspinlock.o obj-$(CONFIG_HWSPINLOCK_STM32) += stm32_hwspinlock.o obj-$(CONFIG_HWSPINLOCK_SUN6I) += sun6i_hwspinlock.o -obj-$(CONFIG_HSEM_U8500) += u8500_hsem.o diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c deleted file mode 100644 index 5a2d8c3e0d80..000000000000 --- a/drivers/hwspinlock/u8500_hsem.c +++ /dev/null @@ -1,155 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * u8500 HWSEM driver - * - * Copyright (C) 2010-2011 ST-Ericsson - * - * Implements u8500 semaphore handling for protocol 1, no interrupts. - * - * Author: Mathieu Poirier <[email protected]> - * Heavily borrowed from the work of : - * Simon Que <[email protected]> - * Hari Kanigeri <[email protected]> - * Ohad Ben-Cohen <[email protected]> - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/hwspinlock.h> -#include <linux/platform_device.h> - -#include "hwspinlock_internal.h" - -/* - * Implementation of STE's HSem protocol 1 without interrutps. - * The only masterID we allow is '0x01' to force people to use - * HSems for synchronisation between processors rather than processes - * on the ARM core. - */ - -#define U8500_MAX_SEMAPHORE 32 /* a total of 32 semaphore */ -#define RESET_SEMAPHORE (0) /* free */ - -/* - * CPU ID for master running u8500 kernel. - * Hswpinlocks should only be used to synchonise operations - * between the Cortex A9 core and the other CPUs. Hence - * forcing the masterID to a preset value. - */ -#define HSEM_MASTER_ID 0x01 - -#define HSEM_REGISTER_OFFSET 0x08 - -#define HSEM_CTRL_REG 0x00 -#define HSEM_ICRALL 0x90 -#define HSEM_PROTOCOL_1 0x01 - -static int u8500_hsem_trylock(struct hwspinlock *lock) -{ - void __iomem *lock_addr = lock->priv; - - writel(HSEM_MASTER_ID, lock_addr); - - /* get only first 4 bit and compare to masterID. - * if equal, we have the semaphore, otherwise - * someone else has it. - */ - return (HSEM_MASTER_ID == (0x0F & readl(lock_addr))); -} - -static void u8500_hsem_unlock(struct hwspinlock *lock) -{ - void __iomem *lock_addr = lock->priv; - - /* release the lock by writing 0 to it */ - writel(RESET_SEMAPHORE, lock_addr); -} - -/* - * u8500: what value is recommended here ? - */ -static void u8500_hsem_relax(struct hwspinlock *lock) -{ - ndelay(50); -} - -static const struct hwspinlock_ops u8500_hwspinlock_ops = { - .trylock = u8500_hsem_trylock, - .unlock = u8500_hsem_unlock, - .relax = u8500_hsem_relax, -}; - -static int u8500_hsem_probe(struct platform_device *pdev) -{ - struct hwspinlock_pdata *pdata = pdev->dev.platform_data; - struct hwspinlock_device *bank; - struct hwspinlock *hwlock; - void __iomem *io_base; - int i, num_locks = U8500_MAX_SEMAPHORE; - ulong val; - - if (!pdata) - return -ENODEV; - - io_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(io_base)) - return PTR_ERR(io_base); - - /* make sure protocol 1 is selected */ - val = readl(io_base + HSEM_CTRL_REG); - writel((val & ~HSEM_PROTOCOL_1), io_base + HSEM_CTRL_REG); - - /* clear all interrupts */ - writel(0xFFFF, io_base + HSEM_ICRALL); - - bank = devm_kzalloc(&pdev->dev, struct_size(bank, lock, num_locks), - GFP_KERNEL); - if (!bank) - return -ENOMEM; - - platform_set_drvdata(pdev, bank); - - for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++) - hwlock->priv = io_base + HSEM_REGISTER_OFFSET + sizeof(u32) * i; - - return devm_hwspin_lock_register(&pdev->dev, bank, - &u8500_hwspinlock_ops, - pdata->base_id, num_locks); -} - -static void u8500_hsem_remove(struct platform_device *pdev) -{ - struct hwspinlock_device *bank = platform_get_drvdata(pdev); - void __iomem *io_base = bank->lock[0].priv - HSEM_REGISTER_OFFSET; - - /* clear all interrupts */ - writel(0xFFFF, io_base + HSEM_ICRALL); -} - -static struct platform_driver u8500_hsem_driver = { - .probe = u8500_hsem_probe, - .remove = u8500_hsem_remove, - .driver = { - .name = "u8500_hsem", - }, -}; - -static int __init u8500_hsem_init(void) -{ - return platform_driver_register(&u8500_hsem_driver); -} -/* board init code might need to reserve hwspinlocks for predefined purposes */ -postcore_initcall(u8500_hsem_init); - -static void __exit u8500_hsem_exit(void) -{ - platform_driver_unregister(&u8500_hsem_driver); -} -module_exit(u8500_hsem_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Hardware Spinlock driver for u8500"); -MODULE_AUTHOR("Mathieu Poirier <[email protected]>"); -- 2.51.0
