On 02/04/2026 11:23, Konrad Dybcio wrote:
On 4/1/26 6:51 PM, David Heidelberg via B4 Relay wrote:
From: Casey Connolly <[email protected]>
The SHIFT6mq features an sdcard slot, add it.
Signed-off-by: Casey Connolly <[email protected]>
Signed-off-by: David Heidelberg <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 44 +++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 740eb22550724..c394350998c26 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -600,6 +600,24 @@ &qupv3_id_1 {
status = "okay";
};
+&sdhc_2 {
+ status = "okay";
couple nits:
Status should be last, although the file is all over the place
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
preferably in this order
xxx
xxx-names
[...]
+ sdc2_default_state: sdc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
All other pin definitions in this file have the bias property below
drive-strength (like the card_det_n node you're adding)
other than that
Reviewed-by: Konrad Dybcio <[email protected]>
Thanks for catching these, I completly missed that sorting is non-compliant. New
revision sent w/ ur R-b :)
David
Konrad
--
David Heidelberg
