On 07/05/2026 23:49, Loic Poulain wrote:
Add the uapi header camss-config.h defining the ISP parameter
structures used by the CAMSS Offline Processing Engine (OPE) driver.
This includes structures for white balance, chroma enhancement and
color correction configuration.
Signed-off-by: Loic Poulain <[email protected]>
---
include/uapi/linux/camss-config.h | 115 ++++++++++++++++++++++++++++++++++++++
1 file changed, 115 insertions(+)
diff --git a/include/uapi/linux/camss-config.h
b/include/uapi/linux/camss-config.h
new file mode 100644
index
0000000000000000000000000000000000000000..665406969e66927e8bce83afaa9a3aae53ba2803
--- /dev/null
+++ b/include/uapi/linux/camss-config.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
+/*
+ * Qualcomm CAMSS ISP parameters UAPI
+ *
+ * Uses the generic V4L2 extensible ISP parameters buffer format defined in
+ * <uapi/linux/media/v4l2-isp.h>.
+ *
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#ifndef _UAPI_LINUX_CAMSS_CONFIG_H
+#define _UAPI_LINUX_CAMSS_CONFIG_H
+
+#include <linux/types.h>
+#include <linux/media/v4l2-isp.h>
+/**
+ * enum camss_params_block_type - CAMSS ISP parameter block identifiers
+ *
+ * Each value identifies one ISP processing block. The value is placed in
+ * the @type field of &struct v4l2_isp_params_block_header.
+ */
+enum camss_params_block_type {
+ CAMSS_PARAMS_WB_GAIN = 1,
+ CAMSS_PARAMS_CHROMA_ENHAN = 2,
+ CAMSS_PARAMS_COLOR_CORRECT = 3,
+ CAMSS_PARAMS_MAX,
+};
+
+/**
+ * struct camss_params_wb_gain - White Balance gains
+ *
+ * @header: generic block header; @header.type = CAMSS_PARAMS_WB_GAIN
+ * @g_gain: green channel gain (15uQ10)
+ * @b_gain: blue channel gain (15uQ10)
+ * @r_gain: red channel gain (15uQ10)
+ */
+struct camss_params_wb_gain {
+ struct v4l2_isp_params_block_header header;
+ __u16 g_gain;
+ __u16 b_gain;
+ __u16 r_gain;
+ __u16 _pad;
+} __aligned(8);
+
+/**
+ * struct camss_params_chroma_enhan - RGB to YUV colour matrix
+ *
+ * Implements the CLC_CHROMA_ENHAN pipeline module. All coefficients are
+ * signed 12-bit fixed-point Q3.8 (range roughly -8.0 to +7.996).
+ *
+ * Luma (Y) row of the matrix:
+ * @luma_v0: R-to-Y coefficient (12sQ8, e.g. 0x04d = 0.299)
+ * @luma_v1: G-to-Y coefficient (12sQ8, e.g. 0x096 = 0.587)
+ * @luma_v2: B-to-Y coefficient (12sQ8, e.g. 0x01d = 0.114)
+ * @luma_k: Y output offset (9s, 0 = no offset)
+ *
+ * Chroma (Cb) row:
+ * @coeff_ap: Cb positive coefficient (12sQ8, e.g. 0x0e6 = 0.886)
+ * @coeff_am: Cb negative coefficient (12sQ8, e.g. 0xfb3 = -0.338)
+ * @kcb: Cb output offset (11s, 128 = +128)
+ *
+ * Chroma (Cr) row:
+ * @coeff_cp: Cr positive coefficient (12sQ8, e.g. 0x0b3 = 0.701)
+ * @coeff_cm: Cr negative coefficient (12sQ8, e.g. 0xfe3 = -0.114)
+ * @coeff_dp: Cr positive coefficient (12sQ8)
+ * @coeff_dm: Cr negative coefficient (12sQ8)
+ * @kcr: Cr output offset (11s, 128 = +128)
+ *
+ * @header: generic block header; @header.type = CAMSS_PARAMS_CHROMA_ENHAN
+ */
+struct camss_params_chroma_enhan {
+ struct v4l2_isp_params_block_header header;
+ __u16 luma_v0;
+ __u16 luma_v1;
+ __u16 luma_v2;
+ __u16 luma_k;
+ __u16 coeff_ap;
+ __u16 coeff_am;
+ __u16 coeff_cp;
+ __u16 coeff_cm;
+ __u16 coeff_dp;
+ __u16 coeff_dm;
+ __u16 kcb;
+ __u16 kcr;
+} __aligned(8);
+
+/**
+ * struct camss_params_color_correct - colour correction matrix
+ *
+ * signed 12-bit fixed-point (Qm)
+ *
+ * Out_ch0 (g) = A0*G+B0*B+C0*R + K0
+ * Out_ch1 (b) = A1*G+B1*B+C1*R + K1
+ * Out_ch2 (r) = A2*G+B2*B+C2*R + K2
+ *
+ * m = 0x0 - Coefficients are signed 12sQ7 numbers
+ * m = 0x1 - Coefficients are signed 12sQ8 numbers
+ * m = 0x2 - Coefficients are signed 12sQ9 numbers
+ * m = 0x3 - Coefficients are signed 12sQ10 numbers
+ */
+struct camss_params_color_correct {
+ struct v4l2_isp_params_block_header header;
+ __u16 a[3];
+ __u16 b[3];
+ __u16 c[3];
+ __u16 k[3];
+ __u16 m;
+} __aligned(8);
+
+#define CAMSS_PARAMS_MAX_PAYLOAD \
+ (sizeof(struct camss_params_wb_gain) +\
+ sizeof(struct camss_params_chroma_enhan) +\
+ sizeof(struct camss_params_color_correct))
+
+#endif /* _UAPI_LINUX_CAMSS_CONFIG_H */
--
2.34.1
I think this should instead be the comprehensive list from HFI I
published recently.
There's no point in circumscribing it and HFI is way more widely
available than OPE - so if there are adaptations to be done it should be
on the OPE side not the HFI/IPE side.
---
bod
