This driver would create a wall of logspam during initialization due to e.g. the PLL not being ready while waiting for it to stabilize. Change intermediate dev_err() calls to dev_dbg() to reduce the noise.
While here, log the detected chip ID when that check fails. Signed-off-by: Val Packett <[email protected]> --- sound/soc/codecs/aw88261.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/sound/soc/codecs/aw88261.c b/sound/soc/codecs/aw88261.c index 7b0e778f5a25..d1fc3403cb5a 100644 --- a/sound/soc/codecs/aw88261.c +++ b/sound/soc/codecs/aw88261.c @@ -153,7 +153,7 @@ static int aw88261_dev_get_iis_status(struct aw_device *aw_dev) if (ret) return ret; if ((reg_val & AW88261_BIT_PLL_CHECK) != AW88261_BIT_PLL_CHECK) { - dev_err(aw_dev->dev, "check pll lock fail,reg_val:0x%04x", reg_val); + dev_dbg(aw_dev->dev, "check pll lock fail,reg_val:0x%04x", reg_val); return -EINVAL; } @@ -167,7 +167,7 @@ static int aw88261_dev_check_pll(struct aw_device *aw_dev) for (i = 0; i < AW88261_DEV_SYSST_CHECK_MAX; i++) { ret = aw88261_dev_get_iis_status(aw_dev); if (ret) { - dev_err(aw_dev->dev, "mode1 iis signal check error"); + dev_dbg(aw_dev->dev, "mode1 iis signal check error"); usleep_range(AW88261_2000_US, AW88261_2000_US + 10); } else { return ret; @@ -259,7 +259,7 @@ static int aw88261_dev_check_sysst(struct aw_device *aw_dev) check_val = reg_val & (~AW88261_BIT_SYSST_CHECK_MASK) & AW88261_BIT_SYSST_CHECK; if (check_val != AW88261_BIT_SYSST_CHECK) { - dev_err(aw_dev->dev, "check sysst fail, reg_val=0x%04x, check:0x%x", + dev_dbg(aw_dev->dev, "check sysst fail, reg_val=0x%04x, check:0x%x", reg_val, AW88261_BIT_SYSST_CHECK); usleep_range(AW88261_2000_US, AW88261_2000_US + 10); } else { @@ -553,7 +553,7 @@ static int aw88261_dev_start(struct aw88261 *aw88261) int ret; if (aw_dev->status == AW88261_DEV_PW_ON) { - dev_info(aw_dev->dev, "already power on"); + dev_dbg(aw_dev->dev, "already power on"); return 0; } @@ -563,7 +563,7 @@ static int aw88261_dev_start(struct aw88261 *aw88261) ret = aw88261_dev_configure_syspll(aw88261); if (ret) { - dev_err(aw_dev->dev, "pll check failed cannot start"); + dev_dbg(aw_dev->dev, "pll check failed"); goto pll_check_fail; } @@ -574,7 +574,7 @@ static int aw88261_dev_start(struct aw88261 *aw88261) /* check i2s status */ ret = aw88261_dev_check_sysst(aw_dev); if (ret) { - dev_err(aw_dev->dev, "sysst check failed"); + dev_dbg(aw_dev->dev, "sysst check failed"); goto sysst_check_fail; } @@ -675,18 +675,22 @@ static void aw88261_start_pa(struct aw88261 *aw88261) for (i = 0; i < AW88261_START_RETRIES; i++) { ret = aw88261_reg_update(aw88261, aw88261->phase_sync); if (ret) { - dev_err(aw88261->aw_pa->dev, "fw update failed, cnt:%d\n", i); + dev_dbg(aw88261->aw_pa->dev, + "aw88261_reg_update failed, cnt:%d, ret:%d\n", i, ret); continue; } ret = aw88261_dev_start(aw88261); if (ret) { - dev_err(aw88261->aw_pa->dev, "aw88261 device start failed. retry = %d", i); + dev_dbg(aw88261->aw_pa->dev, + "aw88261_dev_start failed, cnt:%d, ret:%d\n", i, ret); continue; } else { - dev_info(aw88261->aw_pa->dev, "start success\n"); + dev_dbg(aw88261->aw_pa->dev, "start success\n"); break; } } + if (ret != 0) + dev_err(aw88261->aw_pa->dev, "start failure (%d)\n", ret); } static void aw88261_startup_work(struct work_struct *work) @@ -1407,7 +1411,7 @@ static int aw88261_init(struct aw88261 *aw88261, struct i2c_client *i2c, struct return ret; } if (chip_id != AW88261_CHIP_ID) { - dev_err(&i2c->dev, "unsupported device"); + dev_err(&i2c->dev, "unsupported device id = %x", chip_id); return -ENXIO; } -- 2.53.0
