On Wed, May 20, 2026 at 08:08:05PM +0530, Komal Bajaj wrote: > + glink-edge: > + $ref: /schemas/remoteproc/qcom,glink-edge.yaml# > + description: > + Qualcomm G-Link subnode which represents communication edge, channels > + and devices related to the remoteproc core. > + unevaluatedProperties: false > + > + qcom,smem-states: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: States used by the AP to signal the Hexagon core > + items: > + - description: Stop the remote processor
You again got the warning here. It must be solved, don't send the same. See thread: https://lore.kernel.org/all/[email protected]/ > + > + qcom,smem-state-names: > + description: The names of the state bits used for SMP2P output > + items: > + - const: stop > + > +required: > + - compatible > + - reg > + - memory-region > + > +allOf: > + - $ref: /schemas/remoteproc/qcom,pas-common.yaml# > + > + - if: > + properties: > + compatible: > + enum: > + - qcom,shikra-cdsp-pas > + - qcom,shikra-mpss-pas > + then: > + properties: > + interrupts: > + minItems: 6 > + interrupt-names: > + minItems: 6 > + memory-region: > + maxItems: 1 > + firmware-name: > + maxItems: 1 > + power-domains: > + items: > + - description: CX power domain > + power-domain-names: > + items: > + - const: cx > + > + - if: > + properties: > + compatible: > + enum: > + - qcom,shikra-lpaicp-pas > + then: > + properties: > + interrupts: > + maxItems: 5 > + interrupt-names: > + maxItems: 5 > + memory-region: > + minItems: 2 > + firmware-name: > + minItems: 2 power-domains: false power-domain-names: false > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,rpmcc.h> > + #include <dt-bindings/interconnect/qcom,icc.h> > + #include <dt-bindings/interconnect/qcom,rpm-icc.h> > + #include <dt-bindings/interconnect/qcom,shikra.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/power/qcom-rpmpd.h> > + > + remoteproc@b300000 { > + compatible = "qcom,shikra-cdsp-pas"; > + reg = <0x0b300000 0x100000>; > + > + interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack", "shutdown-ack"; > + > + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; > + clock-names = "xo"; > + > + interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG > + &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; > + > + power-domains = <&rpmpd RPMHPD_CX>; > + power-domain-names = "cx"; > + > + memory-region = <&cdsp_mem>; > + > + qcom,smem-states = <&cdsp_smp2p_out 0>; > + qcom,smem-state-names = "stop"; Missing firmware-name > + > + glink-edge { > + interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>; > + mboxes = <&apcs_glb 4>; > + qcom,remote-pid = <5>; > + label = "cdsp"; > + }; > + }; > > -- > 2.34.1 >
