This series enables a set of miscellaneous features for Billion Capture+ (a handset using the MSM8953 SoC released in 2017): - Panel and GPU - Touchscreen - WiFi + Bluetooth - Hall sensor
To: Neil Armstrong <[email protected]> To: Jessica Zhang <[email protected]> To: David Airlie <[email protected]> To: Simona Vetter <[email protected]> To: Maarten Lankhorst <[email protected]> To: Maxime Ripard <[email protected]> To: Thomas Zimmermann <[email protected]> To: Rob Herring <[email protected]> To: Krzysztof Kozlowski <[email protected]> To: Conor Dooley <[email protected]> To: Bjorn Andersson <[email protected]> To: Konrad Dybcio <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: ~postmarketos/[email protected] Cc: [email protected] Signed-off-by: Cristian Cozzolino <[email protected]> --- Changes in v6: - Drop applied patches; - Pick up tag; - Link to v5: https://lore.kernel.org/r/[email protected] Changes in v5: - Based on dts-coding-style.html ("Nodes without unit addresses shall be ordered alpha-numerically by the node name. For a few node types, they can be ordered by the main property, e.g. pin configuration states ordered by value of “pins” property."), sort pinctrl states by GPIO index (Konrad); - Pick up tags; - Link to v4: https://lore.kernel.org/r/[email protected] Changes in v4: - (patch 1/6): added a new compatible (since it's not possible to identify panel vendor/id), matching user of this device and leaving novatek,nt35532 as fallback (Dmitry); - (patch 2/6): - according to bindings changes, make panel driver handling multiple panels paired with NT35532 and use specific compatible/data; - due to changes applied to panel code, remove tag received previously by Dmitry. - (patch 3/6): - use a specific panel compatible, according to bindings changes; - remove 'output-high' property from panel pinctrl, since panel is not reset. - Link to v3: https://lore.kernel.org/r/[email protected] Changes in v3: - (patch 1/6): removed avdd, avee and vci supplies from 'required' properties; - (patch 2/6): - removed "select VIDEOMODE_HELPERS" from nt35532 Kconfig entry, since its functions are not used (but this option is enabled and its code compiled anyway) by nt35532 panel driver; - pick up tags (Dmitry). - (patch 3/6): replaced a506_zap.mdt with a506_zap.mbn firmware name in gpu_zap_shader (Dmitry); - (patch 5/6): pick up tags (Konrad); - (patch 6/6): pick up tags (Konrad); - Link to v2: https://lore.kernel.org/r/[email protected] Changes in v2: - (patch 1/6): define power supplies in the bindings as per datasheet and update example; - (patch 2/6): add blank lines where required between mipi dsi write sequences in nt35532_on() function and make use of names for mipi dcs commands, instead of hex numbers, to improve readibility (Dmitry); - (patch 3/6): move pinctrl lines ibto panel node and get rid of sleep/reset state, since panel just uses one pinctrl state for default/sleep (Dmitry). Also, update power supplies according to bindings; - (patch 4/6): pick up tags (Konrad,Dmitry); - (patch 6/6): squash hall sensor node into gpio-keys (Dmitry); - Link to v1: https://lore.kernel.org/r/[email protected] --- Cristian Cozzolino (4): arm64: dts: qcom: msm8953-flipkart-rimob: Enable display and GPU arm64: dts: qcom: msm8953-flipkart-rimob: Enable WiFi/Bluetooth arm64: dts: qcom: msm8953-flipkart-rimob: Enable touchscreen arm64: dts: qcom: msm8953-flipkart-rimob: Enable Hall sensor .../arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts | 138 ++++++++++++++++++++- 1 file changed, 137 insertions(+), 1 deletion(-) --- base-commit: be5c93fa674f0fc3c8f359c2143abce6bbb422e6 change-id: 20260303-rimob-new-features-037944b3a620 Best regards, -- Cristian Cozzolino <[email protected]>
