On Tue, 23 Jun 2026 03:05:16 -0700, Jingyi Wang wrote:
> Add initial support for SoCCP on Qualcomm Kaanapali platform. SoC Control
> Processor (SoCCP) is loaded by bootloader on Kaanapali. PAS loader will
> check the state of the subsystem, and set the status "attached". As the
> interrupts are redefined differently for Kaanapali SoCCP, list for the
> interrupt properties are moved out of pas-common.
>
> When we return fail in the rproc attach op, current remoteproc core cannot
> handle it correctly for further recovery/firmware loading, which should be
> generic problem shared across all remoteproc drivers that do attach and
> not mandatory for normal bring up, a separate series is used for resolving
> this:
> https://lore.kernel.org/all/[email protected]/
>
> [...]
Applied, thanks!
[1/6] dt-bindings: remoteproc: qcom: cleanup qcom,adsp.yaml
commit: 9698acea9b21937877d7d301883a6c8277a08900
[2/6] dt-bindings: remoteproc: qcom: move interrupts and interrupt-names list
out of pas-common
commit: 5eb8427596322c9c51638b906f39acff7c10c963
[3/6] dt-bindings: remoteproc: qcom: Document pas for SoCCP on Kaanapali and
Glymur platforms
commit: 8b54bacadc0c17e735ea8cb45e78ff360803a302
[4/6] dt-bindings: remoteproc: qcom: Document pas for SoCCP on Hawi and Maili
SoC
commit: f45ec01bae29a96374690fa323b42717e62aa575
[5/6] remoteproc: qcom: pas: Add late attach support for subsystems
commit: 16472c99f4699cb28f2f5f946400ead02f58a15e
[6/6] remoteproc: qcom_q6v5_pas: Add SoCCP node on Kaanapali
commit: 1f9ecae2ec6aa473825d713221d43bae72fcdfe9
Best regards,
--
Bjorn Andersson <[email protected]>
