Since there's already a define for gpio67 (mclk3) in kodiak.dtsi, use that instead of defining an extra pinctrl state. Also rename the suspend state to match naming.
No functional change intended. Signed-off-by: Luca Weiss <[email protected]> --- .../boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso index b9e4a5214f70..aceafea45343 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso @@ -51,8 +51,8 @@ camera@1a { reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "suspend"; - pinctrl-0 = <&cam2_default>; - pinctrl-1 = <&cam2_suspend>; + pinctrl-0 = <&cam_mclk3_default>; + pinctrl-1 = <&cam_mclk3_suspend>; clocks = <&camcc CAM_CC_MCLK3_CLK>; assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; @@ -73,14 +73,7 @@ imx577_ep: endpoint { }; &tlmm { - cam2_default: cam2-default-state { - pins = "gpio67"; - function = "cam_mclk"; - drive-strength = <2>; - bias-disable; - }; - - cam2_suspend: cam2-suspend-state { + cam_mclk3_suspend: cam-mclk3-suspend-state { pins = "gpio67"; function = "cam_mclk"; drive-strength = <2>; -- 2.55.0
