On 8/9/26 6:48 PM, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <[email protected]>
>
> Initial submission for one member of the prime Xiaomi Mi 8 family.
> Mi 8 Pro (equuleus) and Mi 8 Explorer (ursa) are nearly identical.
> Known differences are battery capacity and fingerprint sensor placement.
> This submission includes basic abstraction for other developers to be
> able easily extend it to support other variants.
I had one of those. IIRC the Pro had a 3d IR scanner (vide face id)
whereas the base one had a normal IR cam
[...]
> + reserved-memory {
> + adsp_mem: memory@8c500000 {
adsp@ etc. and drop labels where unused
[...]
> + linux,cma {
> + compatible = "shared-dma-pool";
> + alloc-ranges = <0 0x00000000 0 0xffffffff>;
> + reusable;
> + alignment = <0 0x400000>;
> + size = <0 0x2c00000>;
> + linux,cma-default;
> + };
Is this necessary?
> + };
> +
> + vph_pwr: regulator-vph-pwr {
This is out of order
[...]
> +&adsp_pas {
> + firmware-name = "qcom/sdm845/Xiaomi/dipper/adsp.mbn";
Would you know whether the FWs are common across the SKUs?
And more importantly, regulator settings? FWIW it's easiest to compare
compiled DTBs (or even better, ones pulled from sysfs on a running
system)
[...]
> +&tlmm {
> + gpio-reserved-ranges = < 0 4>, /* SPI (Goodix Fingerprint) */
odd space after <
> + <81 4>; /* SPI (Synaptics Fingerprint) */
No NFC eSE reservation?
[...]
> +&usb_1_dwc3 {
> + /* Until we have Type C hooked up we'll force this as peripheral. */
Should be fairly trivial on 845, no?
> + dr_mode = "peripheral";
> +
> + maximum-speed = "high-speed";
> + phys = <&usb_1_hsphy>;
> + phy-names = "usb2-phy";
No SS?
[...]
> + bluetooth {
> + compatible = "qcom,wcn3990-bt";
> +
> + /*
> + * This path is relative to the qca/
> + * subdir under lib/firmware.
> + */
Let's drop this comment, not very useful
Konrad
