Fix typos in comments, reported by scripts/checkpatch.pl using the misspelling list in scripts/spelling.txt. Only touches comments, no code changes.
Assisted-by: Cursor:claude-opus-5 Signed-off-by: Hemanth Selam <[email protected]> --- drivers/net/ieee802154/at86rf230.c | 2 +- net/mac802154/iface.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 6156cf379916..f1adca942e3d 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -1370,7 +1370,7 @@ static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim) * but this is different on each board setup. You need to fine * tuning this value via CTRIM. * CTRIM = variable capacitor setting. Resolution is 0.3 pF range is - * 0 pF upto 4.5 pF. + * 0 pF up to 4.5 pF. * * Examples: * atben transceiver: diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c index b823720630e7..ff6e99257bc8 100644 --- a/net/mac802154/iface.c +++ b/net/mac802154/iface.c @@ -521,7 +521,7 @@ static void ieee802154_if_setup(struct net_device *dev) /* Let hard_header_len set to IEEE802154_MIN_HEADER_LEN. AF_PACKET * will not send frames without any payload, but ack frames - * has no payload, so substract one that we can send a 3 bytes + * has no payload, so subtract one that we can send a 3 bytes * frame. The xmit callback assumes at least a hard header where two * bytes fc and sequence field are set. */ -- 2.48.1
