On Mon, Sep 07, 2026 at 05:58:08PM +0200, David Heidelberg via B4 Relay wrote: > Describe the dual front-facing IMX355 sensors (standard and wide) > and enable the PMI8998 flash LED with hardware-accurate limits. > > This brings up the basic camera topology and flash support in DT. > > Signed-off-by: David Heidelberg <[email protected]> > --- > Changes in v9: > - Dependency merged, no longer depends on anything.
Do you know if there's a immutable branch containing dt-bindings/media/video-interface-devices.h somewhere, because this is still an unmet dependency in my tree. Regards, Bjorn > - Link to v8: > https://patch.msgid.link/[email protected] > > Changes in v8: > - Fix ordering of includes. (Konrad) > - Link to v7: > https://lore.kernel.org/r/[email protected] > > Changes in v7: > - Depend on the > > https://lore.kernel.org/all/[email protected]/ > (Konrad) > - Sort the renamed regulators. Why Mr. Anderson, why. (Konrad) > - Link to v6: > https://lore.kernel.org/r/[email protected] > > Changes in v6: > - Remove forgotten bias-pull-down property from cci0_sleep node. > (dtbs_check) > - ..-regulator -> regulator-.. (Konrad) > - Rename camera -pin to -state and remove _pin from the labes. (Konrad, > dtbs_check) > - Link to v5: > https://lore.kernel.org/r/[email protected] > > Changes in v5: > - Added function-enumarator to flash LEDs. (Sashiko) > - Dropped l22a regulator needed only for NFOV actuator. (Sashiko) > - Dropped vdda-csi[0-2]-supply, as it was unused. (Sashiko). > - Added previously omited cam_mclk2_sleep sleep state. > - Link to v4: > https://lore.kernel.org/r/[email protected] > > Changes in v4: > - Use 24 MHz ext clock for the cameras, as the downstream does, since > the upstream driver can now support it. > - Added additional LED, as the phone contains two separately controlled > white LEDs flash (upper and bottom, in one module). > - Increase flash-max-microamp, as I took wrong "flash" from the > downstream sources and dropped Dmitry R-b. > - Address formatting issues. (Konrad) > - Link to v3: > https://lore.kernel.org/r/[email protected] > > Changes in v3: > - Dropped cam_vio label. (Dmitry) > - Move the MCLK2 pinctrl from cameras to common camss. (Dmitry) > - Link to v2: > https://lore.kernel.org/r/[email protected] > > Changes in v2: > - leds.h include escaped the initial submission. Fixed. > - Link to v1: > https://lore.kernel.org/r/[email protected] > > --- > David Heidelberg (2): > arm64: dts: qcom: sdm845-google: Add dual front IMX355 cameras > arm64: dts: qcom: sdm845-google: Enable PMI8998 camera flash LEDs > > arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 199 > ++++++++++++++++++++- > 1 file changed, 198 insertions(+), 1 deletion(-) > --- > base-commit: 944a035ecca915ae947905dcfb03f2b9dc6d032c > change-id: 20260315-pixel3-camera-a9989bf589ee > > Best regards, > -- > David Heidelberg <[email protected]> > >
