Adds a basic device tree for the OnePlus 8T (kebab). Common values for OnePlus devices using the sm8250 SOC are defined in sm8250-oneplus-common.
This basic device tree brings up a framebuffer, UFS, battery monitoring, volume keys and UART. Further functionality will be brought up in subsequent patch sets. Signed-off-by: Frieder Hannenheim <[email protected]> --- Changes in v3: - create a new commit for dt-binding addition - reorder /delete-node/s in sm8250-oneplus-common.dtsi - remove prototype revision msm id - remove zero-value board id - reorder pinctrl properies with name at the end - alphabetically order volume button nodes - rename vol-down-n -> vol-down-l - remove zero ecc size in ramoops - add comments describing reserved gpio ranges - correct pm8008 pinctrl - Link to v2: https://patch.msgid.link/[email protected] Changes in v2: - Add dt-binding for oneplus,kebab - rename power button gpios to match sm8250-samsung-common - remove unnecessary qup_i2c7_default and qup_i2c7_default nodes - remove qcom,kona from top-level compatible - enable i2c2 and add pinctrl to pm8008 - remove unused pinctrl node in pm8008 - Link to v1: https://patch.msgid.link/[email protected] --- Frieder Hannenheim (3): dt-bindings: arm: qcom: Document OnePlus 8T arm64: dts: qcom: Add sm8250-oneplus-common.dtsi arm64: dts: qcom: oneplus-kebab: new device Documentation/devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../arm64/boot/dts/qcom/sm8250-oneplus-common.dtsi | 607 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/sm8250-oneplus-kebab.dts | 130 +++++ 4 files changed, 739 insertions(+) --- base-commit: 8d3ae59288f1e7d58d76558a6ee96d533bc5019f change-id: 20261015-kebab_dts-f13f9665e9fc Best regards, -- Frieder Hannenheim <[email protected]>
