On Tue, Feb 19, 2008 at 03:22:39PM +0100, Ingo Molnar wrote:
> 
> * Dhaval Giani <[EMAIL PROTECTED]> wrote:
> 
> > Hi,
> > 
> > I've been running ftrace on the sched-devel tree. I just built a 
> > kernel and tried rebooting using kexec and I get this,
> 
> hm, it's not a good idea to keep using the data structures of the tracer 
> while we kexec. Does the patch below resolve the problem?
> 

It boots, but I get this now


[    0.296073] ------------[ cut here ]------------
[    0.300018] WARNING: at kernel/lockdep.c:2689 check_flags+0xf6/0x10b()
[    0.300018] Modules linked in:
[    0.300018] Pid: 1, comm: swapper Not tainted 2.6.25-rc2-sched-devel #8
[    0.300018]  [<c012089c>] warn_on_slowpath+0x46/0x60
[    0.300018]  [<c0138ca7>] ? very_verbose+0x8/0xc
[    0.300018]  [<c0139a7e>] ? check_chain_key+0xe/0x1a3
[    0.300018]  [<c0138ca7>] ? very_verbose+0x8/0xc
[    0.300018]  [<c0138ca7>] ? very_verbose+0x8/0xc
[    0.300018]  [<c0139a7e>] ? check_chain_key+0xe/0x1a3
[    0.300018]  [<c0104800>] ? mcount_call+0x5/0x9
[    0.300018]  [<c0139a7e>] ? check_chain_key+0xe/0x1a3
[    0.300019]  [<c013b2f5>] ? __lock_acquire+0x614/0x668
[    0.300019]  [<c0139a7e>] ? check_chain_key+0xe/0x1a3
[    0.300019]  [<c01541c6>] ? ftrace_record_ip+0x124/0x130
[    0.300019]  [<c0104800>] ? mcount_call+0x5/0x9
[    0.300019]  [<c0242f58>] ? debug_locks_off+0x8/0x40
[    0.300019]  [<c0104800>] ? mcount_call+0x5/0x9
[    0.300019]  [<c013b78c>] check_flags+0xf6/0x10b
[    0.300019]  [<c013b7d5>] lock_acquire+0x34/0x80
[    0.300019]  [<c040e2eb>] _spin_lock_irqsave+0x27/0x37
[    0.300019]  [<c015414e>] ? ftrace_record_ip+0xac/0x130
[    0.300019]  [<c0124dc4>] ? do_softirq+0x2f/0x47
[    0.300019]  [<c015414e>] ftrace_record_ip+0xac/0x130
[    0.300019]  [<c013a581>] ? trace_softirqs_off+0x8/0xaa
[    0.300019]  [<c0124dc4>] ? do_softirq+0x2f/0x47
[    0.300019]  [<c0104800>] mcount_call+0x5/0x9
[    0.300019]  [<c0124dc4>] ? do_softirq+0x2f/0x47
[    0.300019]  [<c013a581>] ? trace_softirqs_off+0x8/0xaa
[    0.300019]  [<c01249b1>] __local_bh_disable+0x7d/0x83
[    0.300019]  [<c0124d1c>] __do_softirq+0x1e/0x97
[    0.300019]  [<c0124dc4>] do_softirq+0x2f/0x47
[    0.300019]  [<c0124e3b>] irq_exit+0x3c/0x3e
[    0.300019]  [<c011087b>] smp_apic_timer_interrupt+0x32/0x3b
[    0.300019]  [<c0105375>] apic_timer_interrupt+0x2d/0x34
[    0.300019]  [<c012153a>] ? release_console_sem+0xc0/0xda
[    0.300019]  [<c0120000>] ? sys_unshare+0x9c/0x2a8
[    0.300019]  [<c01211ee>] ? vprintk+0x24b/0x256
[    0.300019]  [<c013a455>] ? trace_hardirqs_on+0xb/0xd
[    0.300019]  [<c01541c6>] ? ftrace_record_ip+0x124/0x130
[    0.300019]  [<c0120f95>] ? printk+0x8/0x16
[    0.300019]  [<c0120fa1>] printk+0x14/0x16
[    0.300019]  [<c03a7b85>] sock_register+0x61/0x6a
[    0.300019]  [<c05daefd>] netlink_proto_init+0xf4/0x11a
[    0.300019]  [<c05bca6c>] ? kernel_init+0x0/0x6c
[    0.300019]  [<c05bc8fb>] do_initcalls+0x7a/0x192
[    0.300019]  [<c01a7627>] ? create_proc_entry+0x6c/0x80
[    0.300019]  [<c0104800>] ? mcount_call+0x5/0x9
[    0.300019]  [<c01511b0>] ? register_irq_proc+0xe/0x8b
[    0.300019]  [<c01a0000>] ? load_elf_binary+0x818/0x9e0
[    0.300019]  [<c05bca6c>] ? kernel_init+0x0/0x6c
[    0.300019]  [<c05bca34>] do_basic_setup+0x21/0x23
[    0.300019]  [<c05bca9d>] kernel_init+0x31/0x6c
[    0.300019]  [<c01054cf>] kernel_thread_helper+0x7/0x10
[    0.300019]  =======================
[    0.300019] ---[ end trace ca143223eefdc828 ]---
[    0.300019] irq event stamp: 1894
[    0.300019] hardirqs last  enabled at (1893): [<c013a455>] 
trace_hardirqs_on+0xb/0xd
[    0.300019] hardirqs last disabled at (1894): [<c013a4e6>] 
trace_hardirqs_off+0xb/0xd
[    0.300019] softirqs last  enabled at (1184): [<c0124d90>] 
__do_softirq+0x92/0x97
[    0.300019] softirqs last disabled at (1175): [<c0124dc4>] 
do_softirq+0x2f/0x47

-- 
regards,
Dhaval
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to