On 29/07/12 21:22, Rafael J. Wysocki wrote: > Hi, >
[... long snip ...] > > Do I understand correctly that you want to disable those things through > sysfs? > > Rafael > Hi Rafael, the aim is to select a PNP ACPI option where resources can be disabled (or are not needed). E.g., the parallel port of the 600E can be used with and without IRQ lines. The means to allow for this is to use the sysfs interface to select disabled resources (just like any other resource value). In https://lkml.org/lkml/2011/7/3/41, I used the following example: echo disable > /sys/bus/pnp/devices/$device/resources echo clear > /sys/bus/pnp/devices/$device/resources echo set irq disabled > /sys/bus/pnp/devices/$device/resources echo fill > /sys/bus/pnp/devices/$device/resources echo activate > /sys/bus/pnp/devices/$device/resources The third line is made possible by the patch series. All other lines are already implemented. --- Witold -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
