There is only one "boardtype" actually supported by this driver.
The second entry in the boardinfo is a dummy entry that would
result in an unusable device.
Remove the boardinfo fields and just use the open coded values
in the subdevice setup.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/staging/comedi/drivers/dyna_pci10xx.c | 32 ++++++++-------------------
1 file changed, 9 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c
b/drivers/staging/comedi/drivers/dyna_pci10xx.c
index 80bfae5..a23969e 100644
--- a/drivers/staging/comedi/drivers/dyna_pci10xx.c
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -57,24 +57,12 @@ static const char range_codes_pci1050_ai[] = { 0x00, 0x10,
0x30 };
struct boardtype {
const char *name;
int device_id;
- int ai_chans;
- int ao_chans;
- int di_chans;
- int do_chans;
- const struct comedi_lrange *range_ai;
- const char *range_codes_ai;
};
static const struct boardtype boardtypes[] = {
{
.name = "dyna_pci1050",
.device_id = 0x1050,
- .ai_chans = 16,
- .ao_chans = 16,
- .di_chans = 16,
- .do_chans = 16,
- .range_ai = &range_pci1050_ai,
- .range_codes_ai = range_codes_pci1050_ai,
},
/* dummy entry corresponding to driver name */
{.name = DRV_NAME},
@@ -94,7 +82,6 @@ static int dyna_pci10xx_insn_read_ai(struct comedi_device
*dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
- const struct boardtype *thisboard = comedi_board(dev);
struct dyna_pci10xx_private *devpriv = dev->private;
int n, counter;
u16 d = 0;
@@ -102,7 +89,7 @@ static int dyna_pci10xx_insn_read_ai(struct comedi_device
*dev,
/* get the channel number and range */
chan = CR_CHAN(insn->chanspec);
- range = thisboard->range_codes_ai[CR_RANGE((insn->chanspec))];
+ range = range_codes_pci1050_ai[CR_RANGE((insn->chanspec))];
mutex_lock(&devpriv->mutex);
/* convert n samples */
@@ -139,13 +126,12 @@ static int dyna_pci10xx_insn_write_ao(struct
comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
- const struct boardtype *thisboard = comedi_board(dev);
struct dyna_pci10xx_private *devpriv = dev->private;
int n;
unsigned int chan, range;
chan = CR_CHAN(insn->chanspec);
- range = thisboard->range_codes_ai[CR_RANGE((insn->chanspec))];
+ range = range_codes_pci1050_ai[CR_RANGE((insn->chanspec))];
mutex_lock(&devpriv->mutex);
for (n = 0; n < insn->n; n++) {
@@ -259,9 +245,9 @@ static int dyna_pci10xx_attach_pci(struct comedi_device
*dev,
s = dev->subdevices + 0;
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
- s->n_chan = thisboard->ai_chans;
+ s->n_chan = 16;
s->maxdata = 0x0FFF;
- s->range_table = thisboard->range_ai;
+ s->range_table = &range_pci1050_ai;
s->len_chanlist = 16;
s->insn_read = dyna_pci10xx_insn_read_ai;
@@ -269,7 +255,7 @@ static int dyna_pci10xx_attach_pci(struct comedi_device
*dev,
s = dev->subdevices + 1;
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE;
- s->n_chan = thisboard->ao_chans;
+ s->n_chan = 16;
s->maxdata = 0x0FFF;
s->range_table = &range_unipolar10;
s->len_chanlist = 16;
@@ -279,20 +265,20 @@ static int dyna_pci10xx_attach_pci(struct comedi_device
*dev,
s = dev->subdevices + 2;
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE | SDF_GROUND;
- s->n_chan = thisboard->di_chans;
+ s->n_chan = 16;
s->maxdata = 1;
s->range_table = &range_digital;
- s->len_chanlist = thisboard->di_chans;
+ s->len_chanlist = 16;
s->insn_bits = dyna_pci10xx_di_insn_bits;
/* digital output */
s = dev->subdevices + 3;
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
- s->n_chan = thisboard->do_chans;
+ s->n_chan = 16;
s->maxdata = 1;
s->range_table = &range_digital;
- s->len_chanlist = thisboard->do_chans;
+ s->len_chanlist = 16;
s->state = 0;
s->insn_bits = dyna_pci10xx_do_insn_bits;
--
1.7.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
