The base address of the card is always found in pci resource 3. There is no need to carry this information in the boardinfo. The reg_sz is not used in the driver. Remove them.
Signed-off-by: H Hartley Sweeten <[email protected]> Cc: Ian Abbott <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> --- drivers/staging/comedi/drivers/cb_pcimdda.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/staging/comedi/drivers/cb_pcimdda.c b/drivers/staging/comedi/drivers/cb_pcimdda.c index ecad85b..0e34603 100644 --- a/drivers/staging/comedi/drivers/cb_pcimdda.c +++ b/drivers/staging/comedi/drivers/cb_pcimdda.c @@ -107,9 +107,6 @@ struct cb_pcimdda_board { unsigned short device_id; int ao_chans; int ao_bits; - int regs_badrindex; /* IO Region for the control, analog output, - and DIO registers */ - int reg_sz; /* number of bytes of registers in io region */ }; static const struct cb_pcimdda_board cb_pcimdda_boards[] = { @@ -118,8 +115,6 @@ static const struct cb_pcimdda_board cb_pcimdda_boards[] = { .device_id = PCI_ID_PCIM_DDA06_16, .ao_chans = 6, .ao_bits = 16, - .regs_badrindex = 3, - .reg_sz = 16, } }; @@ -252,7 +247,7 @@ static int cb_pcimdda_attach(struct comedi_device *dev, ret = comedi_pci_enable(pcidev, dev->board_name); if (ret) return ret; - dev->iobase = pci_resource_start(pcidev, thisboard->regs_badrindex); + dev->iobase = pci_resource_start(pcidev, 3); ret = comedi_alloc_subdevices(dev, 2); if (ret) -- 1.7.11 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
