Hello Wolfgang & J.A. ,
On Sat, 17 Feb 2001, J . A . Magallon wrote:
> On 02.17 Wolfgang Teichmann wrote:
> > Hello,
> > I have problems using my scanner (HP C6270A connected to ncr53c810a)
> > with xsane.
> > I always get the error message:
> > error during read: Error during device I/O
> > Feb 15 23:57:27 localhost kernel: Attached scsi generic sg2 at scsi0,
> > channel 0, id 4, lun 0, type 3
> Try disabling 'Initiate sync negotitation' in the card BIOS for the ID of
> the scanner.
There is no Bios on an 810/810a . There is a way to tell the
driver not to 'initiate Sync' & I'd prolly recommend disabling
'disconnect' as well . UNLESSS you have -any- other device on
the 810's scsi bus . Please see :
linux/drivers/scsi/EADME.ncr53c8xx
Hth , JimL
+----------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | 25416 22nd So | Give me Linux |
| [EMAIL PROTECTED] | DesMoines WA 98198 | only on AXP |
+----------------------------------------------------------------+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
