Here we add the Device Tree nodes which are required to successfully
probe the MMCI driver which will enable the four cards available on
ST-Ericsson's HREF hardware development platform.

Acked-by: Linus Walleij <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
---
 arch/arm/boot/dts/hrefv60plus.dts  |   44 ++++++++++++++++++++++++++++++++++++
 arch/arm/mach-ux500/board-mop500.c |    1 -
 2 files changed, 44 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/hrefv60plus.dts 
b/arch/arm/boot/dts/hrefv60plus.dts
index e2213204..3fd83c6 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -77,6 +77,50 @@
                        };
                };
 
+               // External Micro SD slot
+               sdi0_per1@80126000 {
+                       arm,primecell-periphid = <0x10480180>;
+                       max-frequency = <50000000>;
+                       bus-width = <4>;
+                       mmc-cap-sd-highspeed;
+                       mmc-cap-mmc-highspeed;
+                       vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+                       cd-gpios  = <&tc3589x_gpio 3 0x4>;
+
+                       status = "okay";
+               };
+
+               // WLAN SDIO channel
+               sdi1_per2@80118000 {
+                       arm,primecell-periphid = <0x10480180>;
+                       max-frequency = <50000000>;
+                       bus-width = <4>;
+
+                       status = "okay";
+               };
+
+               // PoP:ed eMMC
+               sdi2_per3@80005000 {
+                       arm,primecell-periphid = <0x10480180>;
+                       max-frequency = <50000000>;
+                       bus-width = <8>;
+                       mmc-cap-mmc-highspeed;
+
+                       status = "okay";
+               };
+
+               // On-board eMMC
+               sdi4_per2@80114000 {
+                       arm,primecell-periphid = <0x10480180>;
+                       max-frequency = <50000000>;
+                       bus-width = <8>;
+                       mmc-cap-mmc-highspeed;
+                       vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+                       status = "okay";
+               };
+
                sound {
                        compatible = "stericsson,snd-soc-mop500";
 
diff --git a/arch/arm/mach-ux500/board-mop500.c 
b/arch/arm/mach-ux500/board-mop500.c
index 4eedf1c..38e53b2 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -818,7 +818,6 @@ static void __init u8500_init_machine(void)
                platform_add_devices(mop500_platform_devs,
                                ARRAY_SIZE(mop500_platform_devs));
 
-               mop500_sdi_init(parent);
                mop500_audio_init(parent);
                i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
                i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to