The turbostat Makefile is pretty simple, its output is placed in the same directory as the source, the install rule has no concept of a prefix or sysroot, and you can set CC to use a specific compiler but not use the more familiar CROSS_COMPILE. By making a few minor changes these limitations are removed while leaving the default behavior matching what it used to be.
Example build with these changes: make CROSS_COMPILE=i686-wrs-linux-gnu- DESTDIR=/tmp install or from the tools directory make CROSS_COMPILE=i686-wrs-linux-gnu- DESTDIR=/tmp turbostat_install Signed-off-by: Mark Asselstine <mark.asselst...@windriver.com> --- Hi, Just throwing this out there. I am not sure there is interest in making these changes but when packaging turbostat I am thinking these changes can prove to be useful. Regards, Mark tools/power/x86/turbostat/Makefile | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/tools/power/x86/turbostat/Makefile b/tools/power/x86/turbostat/Makefile index f856495..aa354e3 100644 --- a/tools/power/x86/turbostat/Makefile +++ b/tools/power/x86/turbostat/Makefile @@ -1,9 +1,21 @@ +CC = $(CROSS_COMPILE)gcc +BUILD_OUTPUT := $(PWD) +PREFIX := /usr +DESTDIR := + turbostat : turbostat.c CFLAGS += -Wall +%: %.c + @mkdir -p $(BUILD_OUTPUT) + $(CC) $(CFLAGS) $< -o $(BUILD_OUTPUT)/$@ + +.PHONY : clean clean : - rm -f turbostat + @rm -f $(BUILD_OUTPUT)/turbostat -install : - install turbostat /usr/bin/turbostat - install turbostat.8 /usr/share/man/man8 +install : turbostat + install -d $(DESTDIR)$(PREFIX)/bin + install $(BUILD_OUTPUT)/turbostat $(DESTDIR)$(PREFIX)/bin/turbostat + install -d $(DESTDIR)$(PREFIX)/share/man/man8 + install turbostat.8 $(DESTDIR)$(PREFIX)/share/man/man8 -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/