Adds AM33XX SPI support to the am33xx.dtsi and the BeagleBone
dts.
Signed-off-by: Matt Porter <mpor...@ti.com>
---
arch/arm/boot/dts/am335x-bone.dts | 17 +++++++++++++++
arch/arm/boot/dts/am33xx.dtsi | 43 +++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone.dts
b/arch/arm/boot/dts/am335x-bone.dts
index 5510979..23edfd8 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -18,6 +18,17 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ am3358_pinmux: pinmux@44e10800 {
+ spi1_pins: pinmux_spi1_pins {
+ pinctrl-single,pins = <
+ 0x190 0x13 /* mcasp0_aclkx.spi1_sclk,
OUTPUT_PULLUP | MODE3 */
+ 0x194 0x33 /* mcasp0_fsx.spi1_d0,
INPUT_PULLUP | MODE3 */
+ 0x198 0x13 /* mcasp0_axr0.spi1_d1,
OUTPUT_PULLUP | MODE3 */
+ 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0,
OUTPUT_PULLUP | MODE3 */
+ >;
+ };
+ };
+
ocp {
uart1: serial@44e09000 {
status = "okay";
@@ -84,3 +95,9 @@
&mmc1 {
vmmc-supply = <&ldo3_reg>;
};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index ef8e105..854235e 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -40,6 +40,15 @@
};
};
+ am3358_pinmux: pinmux@44e10800 {
+ compatible = "pinctrl-single";
+ reg = <0x44e10800 0x0238>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7f>;
+ };
+
/*
* XXX: Use a flat representation of the AM33XX interconnect.
* The real AM33XX interconnect network is quite complex.Since
@@ -260,6 +269,40 @@
status = "disabled";
};
+ spi0: spi@48030000 {
+ compatible = "ti,omap4-mcspi";
+ ti,hwmods = "spi0";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x48030000 0x400>;
+ interrupt-parent = <&intc>;
+ interrupt = <65>;
+ dmas = <&edma 16
+ &edma 17
+ &edma 18
+ &edma 19>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ ti,spi-num-cs = <2>;
+ status = "disabled";
+ };
+
+ spi1: spi@481a0000 {
+ compatible = "ti,omap4-mcspi";
+ ti,hwmods = "spi1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x481a0000 0x400>;
+ interrupt-parent = <&intc>;
+ interrupt = <125>;
+ dmas = <&edma 42
+ &edma 43
+ &edma 44
+ &edma 45>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ ti,spi-num-cs = <2>;
+ status = "disabled";
+ };
+
wdt2: wdt@44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
