Hi Marc, I tested the patch v2 with kernel 3.6.1 and 3.7-rc1. Clean compile and works with hardware.
Regards, Muhammad -----Original Message----- From: Marc Kleine-Budde [mailto:m...@pengutronix.de] Sent: October-17-12 6:13 AM To: Muhammad Ghias Cc: 'Wolfgang Grandegger'; linux-kernel@vger.kernel.org; linux-...@vger.kernel.org Subject: Re: [PATCH] CAN: sja1000: Add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board On 10/16/2012 11:03 PM, Muhammad Ghias wrote: > Patch adds support for CANpro/104-Plus Opto CAN board. Board uses PLX9030 > bridge and two NXP SJA1000 CAN controllers. Patch is generated and tested > with kernel 3.6.1. > > If you have any questions or any feedback please let me know. Thanks, the code looks good. Please try, if possible, to send your patches via git send-email, as outlooks messed up the patch. I've fixed all line wrapping problems by hand, applied the patch and send a v2, please test. regards, Marc P.S.: Please use the linux-...@vger.kernel.org mailing list for CAN related patches/topics. -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/