On Tue, Nov 6, 2012 at 6:16 AM, Rafael J. Wysocki <r...@sisk.pl> wrote:
> On Monday, November 05, 2012 09:54:37 AM Bjorn Helgaas wrote:
>> On Sat, Nov 3, 2012 at 2:39 PM, Rafael J. Wysocki <r...@sisk.pl> wrote:
>> > On Saturday, November 03, 2012 01:42:02 PM Bjorn Helgaas wrote:
>> >> On Sat, Nov 3, 2012 at 1:46 AM, Mika Westerberg
>> >> <mika.westerb...@linux.intel.com> wrote:
>> >> > ACPI 5 introduced SPISerialBus resource that allows us to enumerate and
>> >> > configure the SPI slave devices behind the SPI controller. This patch
>> >> > adds
>> >> > support for this to the SPI core.
>> >> >
>> >> > In addition we bind ACPI nodes to SPI devices. This makes it possible
>> >> > for
>> >> > the slave drivers to get the ACPI handle for further configuration.
>> >> >
>> >> > Signed-off-by: Mika Westerberg <mika.westerb...@linux.intel.com>
>> >> > Acked-by: Rafael J. Wysocki <rafael.j.wyso...@intel.com>
>> >> > ---
>> >> > drivers/spi/spi.c | 231
>> >> > ++++++++++++++++++++++++++++++++++++++++++++++++++++-
>>
>> >> > +static acpi_status acpi_spi_add_resources(struct acpi_resource *res,
>> >> > void *data)
>> >> > +{
>> >> > + struct acpi_spi_device_info *info = data;
>> >> > + struct acpi_resource_spi_serialbus *sb;
>> >> > + struct spi_device *spi = info->spi;
>> >> > +
>> >> > + switch (res->type) {
>> >> > + case ACPI_RESOURCE_TYPE_SERIAL_BUS:
>> >> > + sb = &res->data.spi_serial_bus;
>> >> > + if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
>> >> > + spi->chip_select = sb->device_selection;
>> >> > + spi->max_speed_hz = sb->connection_speed;
>> >> > +
>> >> > + /* Mode (clock phase/polarity/etc. */
>> >> > + if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
>> >> > + spi->mode |= SPI_CPHA;
>> >> > + if (sb->clock_polarity == ACPI_SPI_START_HIGH)
>> >> > + spi->mode |= SPI_CPOL;
>> >> > + if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
>> >> > + spi->mode |= SPI_CS_HIGH;
>> >> > +
>> >> > + /*
>> >> > + * The info is valid once we have found the
>> >> > + * SPISerialBus resource.
>> >> > + */
>> >> > + info->valid = true;
>> >> > + }
>> >> > + break;
>> >> > +
>> >> > + case ACPI_RESOURCE_TYPE_IRQ:
>> >> > + info->gsi = res->data.irq.interrupts[0];
>> >> > + info->triggering = res->data.irq.triggering;
>> >> > + info->polarity = res->data.irq.polarity;
>> >> > + break;
>> >> > +
>> >> > + case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
>> >> > + info->gsi = res->data.extended_irq.interrupts[0];
>> >> > + info->triggering = res->data.extended_irq.triggering;
>> >> > + info->polarity = res->data.extended_irq.polarity;
>> >>
>> >> A driver doesn't seem like the right place for _CRS parsing code.
>> >
>> > This is not a driver, however. :-)
>>
>> OK. Can you describe what this is? I assume the picture involves an
>> SPI master device and one or more SPI slave devices, and the ACPI
>> namespace tells us something about them, and somehow this code is
>> related to those devices because it's looking at _CRS for them.
>
> This is part of the SPI core that looks for SPI devices below a controller.
>
>> A _CRS method is associated with a Device in the namespace. What is
>> that device in this case?
>
> An SPI device below a controller.
>
>> What is its PNP ID?
>
> I can't answer that from the top of my head, sorry.
>
>> What driver claims devices with that ID?
>
> The driver that declares support for it in its acpi_match_table[] array.
OK, I guess my problem is in understanding the difference between (1)
a platform device where we use the acpi_match_table[] to locate
devices with matching ACPI IDs, and (2) a device where we use
pnp_register_driver() or acpi_bus_register_driver() to locate devices
with matching ACPI IDs.
They seem similar to me. For example, take a PNP0A03 PCI host bridge.
This seems like a platform device since there's no native hardware
method to enumerate it. The ACPI namespace gives us a way to find it.
We use acpi_bus_register_driver() to bind a driver to it. The driver
has the struct acpi_device * and can access any ACPI state it needs.
The driver supplies .add() and .remove() methods, so in principle the
driver doesn't need to know anything about hotplug (assuming the ACPI
core handles hotplug correctly, which it doesn't yet).
How is the SPI controller different than this? Is there some logical
difference that requires a different framework? Or are you proposing
that we get rid of acpi_bus_register_driver() and migrate everything
to this new framework?
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
