Hi On 31 October 2012 12:17, Jonghwan Choi <jhbird.c...@samsung.com> wrote: > [0]bit is used to enable/disable tmu core. [1] bit is a reserved bit. > > Signed-off-by: Jonghwan Choi <jhbird.c...@samsung.com> > --- > drivers/thermal/exynos_thermal.c | 4 ++-- > 1 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/thermal/exynos_thermal.c > b/drivers/thermal/exynos_thermal.c > index fd03e85..6ce6667 100644 > --- a/drivers/thermal/exynos_thermal.c > +++ b/drivers/thermal/exynos_thermal.c > @@ -53,8 +53,8 @@ > #define EXYNOS_TMU_TRIM_TEMP_MASK 0xff > #define EXYNOS_TMU_GAIN_SHIFT 8 > #define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 > -#define EXYNOS_TMU_CORE_ON 3 > -#define EXYNOS_TMU_CORE_OFF 2 > +#define EXYNOS_TMU_CORE_ON 1 > +#define EXYNOS_TMU_CORE_OFF 0 Hi Jonghwan,
Only this much change is not sufficient. Also you need to do like below, diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index eebd4e5..4575144 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -52,9 +52,11 @@ #define EXYNOS_TMU_TRIM_TEMP_MASK 0xff #define EXYNOS_TMU_GAIN_SHIFT 8 +#define EXYNOS_TMU_GAIN_MASK (0xF << 8) #define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 -#define EXYNOS_TMU_CORE_ON 3 -#define EXYNOS_TMU_CORE_OFF 2 +#define EXYNOS_TMU_REF_VOLTAGE_MASK (0x1F << 24) +#define EXYNOS_TMU_CORE_ON 1 +#define EXYNOS_TMU_CORE_OFF 0 #define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50 /* Exynos4210 specific registers */ @@ -85,7 +87,9 @@ #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 16) #define EXYNOS_MUX_ADDR_VALUE 6 #define EXYNOS_MUX_ADDR_SHIFT 20 +#define EXYNOS_MUX_ADDR_MASK (0xFF << 16) #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 +#define EXYNOS_TMU_TRIP_MODE_MASK (0x7 << 13) #define EFUSE_MIN_VALUE 40 #define EFUSE_MAX_VALUE 100 @@ -658,10 +662,13 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) mutex_lock(&data->lock); clk_enable(data->clk); - con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT | + con = readl(data->base + EXYNOS_TMU_REG_CONTROL); + con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK | EXYNOS_TMU_GAIN_MASK); + con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT | pdata->gain << EXYNOS_TMU_GAIN_SHIFT; if (data->soc == SOC_ARCH_EXYNOS) { + con &= ~(EXYNOS_TMU_TRIP_MODE_MASK | EXYNOS_MUX_ADDR_MASK); con |= pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT; con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT); } Thanks, Amit Daniel > #define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50 > > /* Exynos4210 specific registers */ > -- > 1.7.4.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/